Chat archive · 2021-11

Trying to figure out why adding a tip has created a running balance of bitcoin that’s not the line that is for the tip...Anyone got any ideas?

finally a spambot that understand our every day problems, grease on a kitchen stove

and the first place I would check for an answer to that is a mining pool forum, cause why not

LOL

lmao

baking soda, a little bit of lemon juice. Let it sit wipe off with a clean rag or paper towel.

That moment when you realize your big rig deleted your mining software 5 hours ago... I guess I forgot to set the exemptions.

i had that happen to me a couple days ago while i was at work for a 24hr shift. it sucked

trying to talk the wife through how to set it back up was a no go lol

can’t afford days like that after just winning a newegg shuffle and picking up a 3080ti

Looks like the chia profit calculator on the configurator page is broken again

Ctrent33 wrote: Why no Pirate chain payout? Last time was 4 days ago.

Have you been able to figure anything out on theis?

Site for Help please

sonicrules wrote: Looks like the chia profit calculator on the configurator page is broken again

Please submit a support ticket and Vance will be glad to assist! Make sure you include exactly what the issue is, as this report is too vague to be actionable at present - thanks!

Kaffiend wrote: can’t afford days like that after just winning a newegg shuffle and picking up a 3080ti

Are you happy with it? I’m getting around 90 mh/ using gminer...

Eth 90 mh/s

im using gminer as well i havent messed wit it too much only about 10 min for initial setup to get it running

im getting 85-86 at 244 w

was a little pricey since i have to buy psu with it but happy overall

have to mess with it see if i can get to the 90-91 people say it can do

even better would love for gminer to get a full unlock on lhr =)

would have to go look at it but believe i have core locked at 1500 memory 1200-1300 power 88 fan 80 temps are 56/88

what does your oc’s look like?

i need help with my ticket payments

I need help with my Dogecoin payments

Dude, spamming here in the chat will not get you attention any faster. If you put in the ticket, the ticket will be worked.

Kaffiend wrote: would have to go look at it but believe i have core locked at 1500 memory 1200-1300 power 88 fan 80 temps are 56/88

yep, ive got the mem up to 1500 with slightly temps like 58/90.. i have 2 and just cant seem to get one of them to settle down even dropping it to 1400 core and 1300 mem, but they are simply nice

power down to 85

275-280 watts

Nov 17, 2021 4.00% Trusted Mining bonus on eth! woot!

I must have missed the announcement about the announcement

huh must have missed that too, maybe an unannounced announcement

you know, to mix things up a little

wut

Hopefully over the next couple days while I’m off I can take a look at it and mess with the OC more. I had it at a 92 hash high when first starting gminer and at 73% unlock. But shortly after it locks unlocks and keeps dropping unlock settling in at 70.5 and 85-86 hash atm.

Nice didn’t see anything about the 4% either. Pleasant surprise though

which driver are you using/

I just quickly installed the newest from nvidia and gminer 272 to get it up and running

I tried to setup ACH and entered my password wrong, now every time I select my bank I get "Sorry, we’re having trouble logging into your account. Please try a different account." It won’t let me try again

onedudedesign wrote: I tried to setup ACH and entered my password wrong, now every time I select my bank I get "Sorry, we’re having trouble logging into your account. Please try a different account." It won’t let me try again

Can you please submit a support ticket for this so that we can look into it with you?

Mining Efficiency is under 80%...

Is there something going on??

Nothing unusual here at 98.22%

I hope Prohashing has updated Dogecoin nodes to 1.14.5

Transaction fees are much lower now

I suppose someone know about unMineable, So I want to get Binance Smart Chain to my trust wallet with unMineable, How do I do that? I can convert BEP2 to BSC but fee is 2$ which is a lot for 0.01 BNB

ABplayz wrote: I suppose someone know about unMineable, So I want to get Binance Smart Chain to my trust wallet with unMineable, How do I do that? I can convert BEP2 to BSC but fee is 2$ which is a lot for 0.01 BNB

unmineable allow you to either put in a BEP2 or BEP20 (BSC) address and register yourself to start mining. there is no need to mine in one network and convert to another. what you need is BEP20 so you just put in the BEP20 address register yourself, get the referral code and in your mining software under the --user field put in BNB:<BEP20 address>.<worker name>#<referral code> and that it. in the monitor page you might need to select the switch network to BEP20 in order for the system to recognise your BEP20 address as i believe the default is BEP

ABplayz wrote: I suppose someone know about unMineable, So I want to get Binance Smart Chain to my trust wallet with unMineable, How do I do that? I can convert BEP2 to BSC but fee is 2$ which is a lot for 0.01 BNB

assume you are using gminer. the command should be gminer.exe -a ethash -s ethash.unmineable.com:3333 -u BNB:<BEP20 address>.<worker name>#<referral code>

prohashingdotcom page has a typo...We care are about secure networks for your transactions.

crypto news and resource section dogecoin spelled dodgecoin

That’s fine, you gotta get outta the way like in dodgeball

pmzone wrote:

ABplayz wrote: I suppose someone know about unMineable, So I want to get Binance Smart Chain to my trust wallet with unMineable, How do I do that? I can convert BEP2 to BSC but fee is 2$ which is a lot for 0.01 BNB

unmineable allow you to either put in a BEP2 or BEP20 (BSC) address and register yourself to start mining. there is no need to mine in one network and convert to another. what you need is BEP20 so you just put in the BEP20 address register yourself, get the referral code and in your mining software under the --user field put in BNB:<BEP20 address>.<worker name>#<referral code> and that it. in the monitor page you might need to select the switch network to BEP20 in order for the system to recognise your BEP20 address as i believe the default is BEP

when i keep BEP 20 address it says invalid address so i am confused

pmzone wrote:

ABplayz wrote: I suppose someone know about unMineable, So I want to get Binance Smart Chain to my trust wallet with unMineable, How do I do that? I can convert BEP2 to BSC but fee is 2$ which is a lot for 0.01 BNB

assume you are using gminer. the command should be gminer.exe -a ethash -s ethash.unmineable.com:3333 -u BNB:<BEP20 address>.<worker name>#<referral code>

i am using the unmineable but i will try using gminer after my payout

ABplayz wrote:

pmzone wrote:

ABplayz wrote: I suppose someone know about unMineable, So I want to get Binance Smart Chain to my trust wallet with unMineable, How do I do that? I can convert BEP2 to BSC but fee is 2$ which is a lot for 0.01 BNB

assume you are using gminer. the command should be gminer.exe -a ethash -s ethash.unmineable.com:3333 -u BNB:<BEP20 address>.<worker name>#<referral code>

i am using the unmineable but i will try using gminer after my payout

unMineable software i mean

ABplayz wrote:unMineable software i mean

oh the software. never use it before but if i’m not wrong according to the quide, they only recognise 2 mining software -- xmrig for cpu and pheonixminer for gpu. you suppose to download the mining software and indicate to the software the location of it. after putting in the BNB BEP20 address and referral code, the software will take care of it and start mining.

pmzone wrote:

ABplayz wrote:unMineable software i mean

oh the software. never use it before but if i’m not wrong according to the quide, they only recognise 2 mining software -- xmrig for cpu and pheonixminer for gpu. you suppose to download the mining software and indicate to the software the location of it. after putting in the BNB BEP20 address and referral code, the software will take care of it and start mining.

It says invalid address when i keep BSC BEP 20 BNB thing

Sumoblei wrote: prohashingdotcom page has a typo...We care are about secure networks for your transactions.

Thank you. We’re in the process of redesigning the website, so typos, etc. may get corrected naturally as Michael moves us over into the new design. Oh! I see what you mean. I'll pass that along to Michael.

Banished_Privateer wrote: I hope Prohashing has updated Dogecoin nodes to 1.14.5

It’s been updated.

ABplayz wrote: It says invalid address when i keep BSC BEP 20 BNB thing

perhaps you try to use 3rd party mining software like gminer, t-rex, etc. when using 3rd party s/w, you just need to go to the website select the correct network, input the address to register yourself a referral code then put all these into the command line and it will be done. am sorry can’t help you with the unmineable software as never use that before

ABplayz wrote:It says invalid address when i keep BSC BEP 20 BNB thing

did a quick download of the software and run it. think know what’s your problem. the s/w doesn’t allow you to select which network and uses the default, that why your BEP20 address is invalid. guess you have to do it the 3rd party mining s/w way

pmzone wrote:

ABplayz wrote:It says invalid address when i keep BSC BEP 20 BNB thing

did a quick download of the software and run it. think know what’s your problem. the s/w doesn’t allow you to select which network and uses the default, that why your BEP20 address is invalid. guess you have to do it the 3rd party mining s/w way

ok thx after i get payed out ill start using gminer, just need some bnb(BEP2) for a small project i am working on so yeah

Thanks for helping again

I did not receive the pirate chain payout on the 22nd. The transaction id given does not exist on the explorer.

Looks like SHIBA is running off a cliff

yeah...pretty much anything took a hit again today

but Coinbase just gave me a dollar, 26000 new shibes

Ctrent33 wrote: I did not receive the pirate chain payout on the 22nd. The transaction id given does not exist on the explorer.

For account specific questions like this, could you please submit a support ticket so that we can look into this with you?

-MaVerick- wrote: yeah...pretty much anything took a hit again today

Looks like MANA went to the moon lol

Any idea whats going on with flux payments? Stex flux/btc is working fine

Flux working again now

Sarah Manter wrote:

Banished_Privateer wrote: I hope Prohashing has updated Dogecoin nodes to 1.14.5

It’s been updated.

So when will the Doge free threshold reflect the newly reduced TX fees?

man prices are rising non stop here for GPUs, the 3060 i bought a couple of month ago is now at 1100 euro at some shops like amazon. They slapped a discount on it of 50 euro or something though, black friday stuff

3060ti with +500euro since I bought mine. Absolutely insane

1-2 years ago I wouldn’t have touched anthing above 300euro, now you couldn’t even get a 1060 6GB for that

bMeister1 wrote:

Sarah Manter wrote:

Banished_Privateer wrote: I hope Prohashing has updated Dogecoin nodes to 1.14.5

It’s been updated.

So when will the Doge free threshold reflect the newly reduced TX fees?

This ^^^

and happy thanksgiving

Flux dowm again :(

Crypto Black Friday, -30%

Great. Payday is after weekend >.<

any bugs in the ETH algorithm? It’s impossible to make gains with ETH Mining

looking at the things you posted so far, I thin you have problems understanding stuff

*think

This crash is absurd - hopefully it will finally flush out in-person restuarants and other zombie businesses who continue to think that the world will be "back to normal" within 10 years

The supply chain issues will never be resolved until the economy finally restructures itself away from in-person events and towards a permanent stay-at-home economy

Otherwise, there will just be another crash every four months when the next variant happens, caused by people who continue to think the world will reopen

politicans all over the world are fueling this hope every day. Even now they try to prevent a lockdown here with no hope of success

I love homeoffice btw

at least one good thing that was forced on the economy in the last 2 years

Very true Steve. I have been working remotely since May and my productivity has gone up. The company I work for it now starting to see the benefit. Prior to this, the CEO and VP’s were old school, believing if you were not at the office you were slacking.

There may actaully be something wrong with ETH. I have a 3060 that I switched back to ETH this morning and it is only getting 3 MH/s. This is using the same miner (gminer) that I was using two weeks ago that was getting 38 MH/s. Since I started this morning found only 3 shares. I switched to 2Miners using the same gminer app and the hashrate and share counts are normal for this card.

Not errors, rejected or invalid shares.

from what I can tell, Gminer 271 & 272 had quite some bugs, like random restarts. My mining slave was running straight for 10 days and Gminer collected 13 restarts in that time

currently testing 273