Read-only forum archive. PROHASHING has closed. Posting, registration, and account access are unavailable. Preserved from the April 3, 2026 server backup.

Chat archive · 2021-11

Kaffiend · · #100260

should work i beleive can add in card memory or whatever else is needed from theer

Dolm · · #100261

thanks

Kaffiend · · #100262

np

Kaffiend · · #100263

did it work?

Dolm · · #100264

yes

Kaffiend · · #100265

great

ABplayz · · #100268

Hi, can I keep BSC wallet address as BNB payout address?

ABplayz · · #100269

Hi can anyone answer my question

Mastermind007 · · #100270

I am relocating my mining operation and in the meantime I wanted to change my proportions and coin for payout. All miners were shutdown on Nov 11th and there is still a balance that has not been paid out yet. Why is this?

Steve Sokolowski · · #100271

Mastermind007 wrote: I am relocating my mining operation and in the meantime I wanted to change my proportions and coin for payout. All miners were shutdown on Nov 11th and there is still a balance that has not been paid out yet. Why is this?
Did you set the payout threshold to zero, so that the entire balance is paid? Keep in mind that you’ll be charged the network transaction fees, and for ETH in particular, those fees can cost a lot recently

Mastermind007 · · #100272

Steve Sokolowski wrote:
Mastermind007 wrote: I am relocating my mining operation and in the meantime I wanted to change my proportions and coin for payout. All miners were shutdown on Nov 11th and there is still a balance that has not been paid out yet. Why is this?
Did you set the payout threshold to zero, so that the entire balance is paid? Keep in mind that you’ll be charged the network transaction fees, and for ETH in particular, those fees can cost a lot recently
I only have Coinbase payouts which I thought had no threshold.

Mastermind007 · · #100273

Wait I see the issue. For some reason Coinbase was switched off. Not sure how that happened

Mastermind007 · · #100274

Damn gremlins :)

Mastermind007 · · #100275

I did not have USD as a payout, which was the thought behind the forum post about Coinbase so I did not even think to look at the setting until now.

Kaffiend · · #100276

seems like a handful of peoples coinbase payout turned off on its own. mine did as well the other day.

dhandler01 · · #100277

yeah that happened to me a couple days ago

miqqa · · #100278

Mastermind007 wrote: Wait I see the issue. For some reason Coinbase was switched off. Not sure how that happened
same happened to me a few days back randomly as well

Forum notification · · #100280

has started a new topic: Hi, I am new to prohashing i want some help :)

Mastermind007 · · #100281

Even after the turned my Coinbase payout back on it looks like the payout balance is still unpaid. Not sure is this is a sign of a larger issue. Don’t often get the chance to see this as miners usually don’t go offline for days, allowing the balance to drop to zero. It will be a dew days before I am back up and running. Hopefully that is enough time to figure this out. It is not a lot of money but if it is happening a lot it could mess up the accounting books.

Alynn · · #100282

Reconnect to Coinbase. I’m pretty sure coinbase drops the oauth tokens every few months as a security proceedure.

Mastermind007 · · #100283

Looks like things are processing through. XTZ is the only coin left that has not. May be a good idea to add a payout change to the alert options or something specific to Coinbase if they drop OAuth from time to time. It was just dumb luck I happen to notice it.

Kaffiend · · #100284

my XTZ has paid out anywhere from to on time to 4 days late but always eventually pays

miqqa · · #100286

Mastermind007 wrote: It was just dumb luck I happen to notice it.
same

Setvin · · #100287

etc cash issue now

Setvin · · #100288

*hash

Setvin · · #100289

I dont even see ETC hash on the status anymore...?

Setvin · · #100290

DISCONNECT (12) 0 seconds ago The anchor coin is not able to be mined and there are no other suitable coins available for this worker.

Setvin · · #100291

we gotta get these eth / etc issues sorted it’s been a very unpredictable week

-MaVerick- · · #100292

dunno whats been up the last week, been on a short vacation, but my miners on ethash are working normally. no restarts or something for the last ~4h

Steve Sokolowski · · #100293

Ethereum Classic stopped submitting blocks for an unknown reason

Sumoblei · · #100294

We had a happy Hour for a day or 2 while you were gone... You should vacation more often :)

Steve Sokolowski · · #100295

Chris thinks the cause is that it’s running on a server with an obsolete version of Debian, and he’s waiting for the disks to transfer to a new server

Steve Sokolowski · · #100296

Meanwhile, all other coins are functioning normally with no issues

Setvin · · #100297

I dont have time to change pools so ill just let them keep failing until it connects if thats okay

Setvin · · #100298

as long as u are aware of the issue thanks for addressing it promptly

Setvin · · #100299

there really isnt another option for ETC lol

-MaVerick- · · #100300

Sumoblei wrote: We had a happy Hour for a day or 2 while you were gone... You should vacation more often :)
:D Christmas next time if like 100 factors are in my favor. But glad you had a good time :p

-MaVerick- · · #100301

had the chance to see my family which has been over a year last time. Before the situation here in germany fully escalates again...

Sumoblei · · #100302

My wife has been trying to get to Germany for 2 years to visit...very difficult

-MaVerick- · · #100303

gonna be a rough winter, thats for sure. lets hope for the best

Setvin · · #100304

he’s waiting for the disks to transfer to a new server

Setvin · · #100305

like in the mail? Should I go ahead and do something to my etcminers

ElectricEnigma · · #100306

Setvin wrote: like in the mail? Should I go ahead and do something to my etcminers
eth-low memory until its back up...

Setvin · · #100307

oh yeah forgot about that, but I dont have any batch files made for that right now sigh lol

Setvin · · #100308

my rigs are a pain in the ass to switch over i was hoping I didnt have to. Probably will just keep letting them wait

XCM · · #100309

I switched my miner from ETC to RVN.

bMeister1 · · #100310

Personally I wouldn’t even care about the fact that ETC is down for a little bit if GMiner’s failover pool system actually worked properly.

Kaffiend · · #100311

does gminers not work? i still have not tried setting it up for eth

Macky82 · · #100312

anyone getting disconnected and reconnecting

bMeister1 · · #100313

Kaffiend wrote: does gminers not work? i still have not tried setting it up for eth
It works great for actual mining but whenever Prohashing’s servers have these issues and just closes the connection, Gminer just endlessly reattempts to connect after the server closes the connection instead of failing over to a backup pool. It seems unique to the "Connection Closed" error as any other connection error triggers failover as expected.

bMeister1 · · #100314

Even more strange is the fact that one rig might failover properly while the other spins its wheels until I force it to run on a different pool. It’s honestly my only gripe with Gminer cuz when the failover code works, it works great. But for whatever reason, it just doesn’t like the way Prohashing handles server issues.

romes · · #100315

im running a version of gminer that works fine

romes · · #100316

is ethash low memory still down?

OneOfThePetes · · #100317

Is there something wrong with XRP transfers? I’ve had a payout, but it didn’t arrive

OneOfThePetes · · #100318

ah nvm... it LITERALLy just arrived

Mastermind007 · · #100320

The XTX balance has yet to payout. I thought for certain a day have I reenable the Coinbase connection it would have processed. It is not much, a little over 1 USD but my OSD kicks in whenever something does not work as it should.

Setvin · · #100321

Sigh etc still down...? I dont want to install a new mining software on multiple rigs just to not mine what I dont wanna mine lol

Mastermind007 · · #100322

*OCD damn auto correct

Mastermind007 · · #100323

@Setvin I hear ya. If you luck is like mine as soon as you get everything switched, etc will start working again.

Mastermind007 · · #100325

I am hoping it is just the status page not updating correctly as it looks like the number of found blocks has dropped to one or two Verge or Callisto instead of the usual blocks flying by quickly. Been busy and have not been monitoring things so forgive me if this has been discussed already.

Alynn · · #100326

ETC was up for me this morning. I’m back on it doing things. with my RX cards

Mastermind007 · · #100327

Setvin wrote: like in the mail? Should I go ahead and do something to my etcminers
Hopefully the drives are not stuck in a shipping container on the ship off the coast of California. Seems to be a floating city forming our there.

Pandega28 · · #100328

stratum+tcp://prohashing.com:3333

pmzone · · #100329

Setvin wrote: Sigh etc still down...? I dont want to install a new mining software on multiple rigs just to not mine what I dont wanna mine lol

pmzone · · #100330

etchash was like up since 7 hours ago fyi

Sarah Manter · · #100331

-MaVerick- wrote: had the chance to see my family which has been over a year last time. Before the situation here in germany fully escalates again...
That’s great that you got to see your family!

romes · · #100332

pmzone wrote: etchash was like up since 7 hours ago fyi
ok, i plugged miner back in. still hasnt gotten any work though. ill let it run

romes · · #100333

When I look at the mining status page and look at earnings for yesterday, almost all N/A even the scrypt coins. Not sure if thats normal though heh

romes · · #100334

ooops, nm, i was scrolled down on the blocks found section

romes · · #100335

low memory etchash must still be down, unplugged miner for the time being again

Alynn · · #100336

etchash doesn’t have a low memory. If you mean Eth-low memory, check the dag sizes and set your c value to that coin. It doesn’t seem to pay attention to the l= perameter

romes · · #100337

Alynn wrote: etchash doesn’t have a low memory. If you mean Eth-low memory, check the dag sizes and set your c value to that coin. It doesn’t seem to pay attention to the l= perameter
ok, lemme see if i can figure that out, thanks

romes · · #100338

romes wrote:
Alynn wrote: check the dag sizes and set your c value to that coin
where would I look to find the dag sizes?

romes · · #100339

nevermind, figured it out, thanks

romes · · #100340

see how it goes, shows my miner connected again but wasn’t sure if i needed all these flags i=e3,l=4,a=ethash-lowmemory c=Callisto

romes · · #100341

’A share has not been submitted for the worker. The current algorithm could be too difficult for the worker. If a CPU or GPU is being used to mine, look at the CPU and GPU quick start guides for recommend algorithms to mine.’

Alynn · · #100342

is there a comma between lowmemory and the c in your password? This could also simply be that your machine is a little slow and hasn’t submitted enough shares. If it shows it hashing, that error will go away after some time.

romes · · #100343

Alynn wrote: is there a comma between lowmemory and the c in your password? This could also simply be that your machine is a little slow and hasn’t submitted enough shares. If it shows it hashing, that error will go away after some time.
There is now, thanks. Ill let it run, see what happens.

romes · · #100344

something doesnt seem right but ill leave it go for a bit.. i had been mining Expanse just fine for months on same algorithm but can’t get any accepted shares doing static on any of the other coins

romes · · #100345

Seeing this error ’AUTHORIZATION (26) 4 seconds ago Authorization failed because the static coin/algorithm combination is in error.’

romes · · #100346

ok got it to work on a different coin, at least its doing something, thanks for the help

romes · · #100347

working great now, guess it didn’t like the first coin i tried for some reason.. many thanks

Setvin · · #100348

ETC back online, no worries sorry for being a baby about it

-MaVerick- · · #100349

ethash happy hour! *rings the bell*

brix106 · · #100350

Has anyone had issues with tezos payouts? Havent had a patout since the 10th.

Banished_Privateer · · #100351

hmm

Setvin · · #100352

eth workers disconnecting / connecting

crypto8 · · #100353

My Scrypt mining rewards for NEO where down 40% today around noon, still lower then normal, anyone else have same issue?

Setvin · · #100356

well i can tell you the entire market is down almost 10% so profits will for sure be lowered

Setvin · · #100357

I have the issue of certain workers disconnecting im not sure if its just because so long between share submits its recognizing as a new device lol

steve_empire · · #100358

Setvin wrote: I have the issue of certain workers disconnecting im not sure if its just because so long between share submits its recognizing as a new device lol

steve_empire · · #100359

steve_empire wrote:
Setvin wrote: I have the issue of certain workers disconnecting im not sure if its just because so long between share submits its recognizing as a new device lol
It happens to me a lot. Sometimes it’s worse than other times. When it gets bad I mine at another pool. :-(

Setvin · · #100360

ok so its not just me... its been really bad the last week.

Steve Sokolowski · · #100361

Setvin wrote: ok so its not just me... its been really bad the last week.
We’re not aware of any widespread issues in regards to Internet connectivity right now, but you can feel free to submit a support ticket if you’d like and we’ll be glad to investigate your specific issue.

Setvin · · #100363

Steve Sokolowski Its possible its a connection issue on my end, do I have a way to test that for myself?

Setvin · · #100364

The reason I think its just the time between shares has increased is because I dont really see a change in profits or shares subbmited, like the total ammount is accurate but it keeps creating new workers as if the connection reset

Setvin · · #100365

But im going to contact my ISP before submitting a ticket, if I notice it still happening I will be sure to submit a ticket.

Setvin · · #100366

Actually its not happening to any other algo, just ETH... so cant be my connection

-MaVerick- · · #100367

you could let a ping command run for a while to see if there are any spikes, preferable on 2 different servers for comparison

-MaVerick- · · #100368

the server in question and google or something