Chat archive · 2021-05
bitelecom · · #96466
Someone knows about PPNLS in BTC takes too long? Result are showing Pending....
has started a new topic: 3090 only running at ~900MHz (50C), when it can do 1860MHz.
bitelecom · · #96468
bitelecom wrote: Someone knows about PPNLS in BTC takes too long? Result are showing Pending....PPLNS
has started a new topic: payout balance consolidation
Futurism · · #96470
I cannot log into my account. I have not used the account for more than three years. What should I do? Open a new account?
has started a new topic: Cannot log into my account
sanderti · · #96473
Hi, I’m pretty new to mining (4weeks now), at the beginning i earned like $3 a day with eth (30mh/s) and over the weekend it ramped up to $8 a day and now back to $5. there was no change in my hardware or anything. I know that eth was pretty high these days but it was not such a big difference to explain (to me) the difference in the earnings. can someone help what I missunderstand?
Alynn · · #96475
@sanderti Think of it like this. every $0.01 the price per MH goes up, you will get .30 more cents a day. So if we go from .10, to .30 (at times) that is an increase of 6 dollars a day for you.
has started a new topic: Flux
Steven Godshall · · #96478
sanderti wrote: Hi, I’m pretty new to mining (4weeks now), at the beginning i earned like $3 a day with eth (30mh/s) and over the weekend it ramped up to $8 a day and now back to $5. there was no change in my hardware or anything. I know that eth was pretty high these days but it was not such a big difference to explain (to me) the difference in the earnings. can someone help what I missunderstand?ETH profitability fluctuates based on network congestion transaction fees. You earn extra when people are paying more to send transactions on the network.
has started a new topic: Ethash-LowMemory Getting Lot of Rejected Shares
has started a new topic: Blackcoin payout to Coinomi Wallet
Jaiven · · #96482
This morning every time I run the miner from the quick start guide it starts up fine but then gives me my folder directory C:\ect followed by Press any key to continue and then terminates when I press any key. Anyone know what is going on?
has started a new topic: "Connection closed by the pool"
Jaiven · · #96484
Jaiven wrote: This morning every time I run the miner from the quick start guide it starts up fine but then gives me my folder directory C:\ect followed by Press any key to continue and then terminates when I press any key. Anyone know what is going on?It finally started working again, not sure why but happy it works.
solarminer · · #96485
bitelecom wrote:I would assume a block has not been found in PPLNS mining since you started so it will continue to show pending.bitelecom wrote: Someone knows about PPNLS in BTC takes too long? Result are showing Pending....PPLNS
Daeghan · · #96486
Is there any easy programs out there as simple as gminer, that will mine in the neoscrypt algo? Sure do wish gminer supported that one...lol
-MaVerick- · · #96487
easyminer hat neo if I’m not mistaken
-MaVerick- · · #96488
*has
-MaVerick- · · #96489
it was one of the programs i stumbled upon when researching this whole mining thingy. easyminer sure was easy to use but I dunno, it didn’t stick
Daeghan · · #96490
tried it, couldnt get it up and running =(
Leftoverloser · · #96491
What is the password for mining doge coin on a L3++
Leftoverloser · · #96492
This is the password I am trying to use a=scrypt,c=dogecoin but it won’t work. it is dead
Steve Sokolowski · · #96493
Leftoverloser wrote: This is the password I am trying to use a=scrypt,c=dogecoin but it won’t work. it is deadDogecoin is a merge-mined coin, and it doesn’t make sense to mine dogecoin as a primary coin, so you shouldn’t statically mine that coin
Steve Sokolowski · · #96494
It’s a better choice to use Proswitching to mine the most profitable coin, and dogecoins will be merge-mined at the same time
tucsondirect · · #96495
Daeghan wrote: Is there any easy programs out there as simple as gminer, that will mine in the neoscrypt algo? Sure do wish gminer supported that one...lolhttps://forums.prohashing.com/viewtopic.php?f=4&t=7694
has started a new topic: Known issue with ethash "suboptimal shares"
has started a new topic: Questions on Algorithm Mining
Leftoverloser · · #96500
Sorry that I am newbie. Question. If I mine proswitch, my payout is whatever I mine.. or what I have set as payout proportions on the payout page? I don’t receive whatever coin I was mining?
-MaVerick- · · #96501
what you set as payout is what you get at the end
-MaVerick- · · #96502
so if you mine eth for example and set it to Doge, you will mine Eth and your payout will be in Dogecoin
Leftoverloser · · #96503
Thanks. That makes me rest assured. I have only mined with Slushpool. This seems great!
blue3 · · #96505
Will I lose my rewards on PPLNS if i disconnected before finding a block?
blue3 · · #96506
I put miner on 24/7 but sometimes got disconnected for 1-2 minutes (2-3 times per day) caused by networking problem
has started a new topic: Coins to mine with low-end GPU and CPU
Steve Sokolowski · · #96508
blue3 wrote: Will I lose my rewards on PPLNS if i disconnected before finding a block?No. You’ll receive your share when the block is found by someone else.
blue3 · · #96509
Steve Sokolowski wrote:blue3 wrote: Will I lose my rewards on PPLNS if i disconnected before finding a block?No. You’ll receive your share when the block is found by someone else.
blue3 · · #96510
blue3 wrote:I read some article saying ocassional user might not be rewarded. But maybe i think too much cause sometimes disconnected is not "occassional" XD Btw, How many days (in average) a ETH block is found?Steve Sokolowski wrote:blue3 wrote: Will I lose my rewards on PPLNS if i disconnected before finding a block?No. You’ll receive your share when the block is found by someone else.
prodigit33 · · #96511
Hello
has started a new topic: Donation Suggestion. American Cancer Society
vxinvest · · #96513
Hello guys, I have a permanent connection error - don’t know what to do...
vxinvest · · #96514
I followed exactly the "getting started" video on Youtube but I get an error " connect to prohashing.com:3339 - access refused - can anybody help please ?
blue3 · · #96515
On PPLNS mining, do I have to make Ethereum payout for Ethash? I want the payout is Dogecoin, worked for FPPS but on PPLNS statistic, it payout 0.000..000 on ETH 
Alynn · · #96516
solo and pplns you are mining the coin you are mining. The reward is in that coin (SOLO =100% PPLNS X% where X is the percentage of shares you contributed)
blue3 · · #96518
Alynn wrote: solo and pplns you are mining the coin you are mining. The reward is in that coin (SOLO =100% PPLNS X% where X is the percentage of shares you contributed)Thanks man, that’s why i get 0,000..0000 ETH. Changing back to FPPS
Alynn · · #96519
Sure, May I suggest you check out all the great documentation this site has. It lays out a lot of it and makes it easy to understand.
blue3 · · #96520
Alynn wrote: Sure, May I suggest you check out all the great documentation this site has. It lays out a lot of it and makes it easy to understand.Ok. I already mined for a week with FPPS. Just tried out PPLNS and it makes me a little bit of confusing. But that’s alright now. I guess i forgot that only FPPS here payout to another coins
blue3 · · #96521
My bad again:
blue3 wrote:In PPLNS mode, merge mined rewards are still credited as if the miner were mining in FPPS mode. When a share is submitted, you earn a small value of the target PPLNS coin, which comes from the expected value of the merge-mining. The value is often around 2% of the PPLNS primary coin rewards and is recorded in "Selected Shares."That’s why the little 0.00...000 was the 2%
mstrozier · · #96522
Finally got back around to trying to figure out why I cannot connect to mine ETCHASH. Your workers configuration site https://prohashing.com/tools/miner-configurator/Etchash has the incorrect information for mining ETC on Prohashing
mstrozier · · #96523
the link shows port 3357 however it appears ETC was rolled up into the other lower memory ethash algo coins under port 3358. When I switched to port 3358 it works.
mstrozier · · #96524
You may want to update your tools / workers config section so that it doesn’t affect new users.
blue3 · · #96525
vxinvest wrote: I followed exactly the "getting started" video on Youtube but I get an error " connect to prohashing.com:3339 - access refused - can anybody help please ?Can you share the configuration & miner name + version?
mstrozier · · #96526
ok I give up on this as now nothing but rejected shares. So assume port is 3357. Just failing in the miner. I’ve created ticket UST-9417 to continue further. Thanks
Steve Sokolowski · · #96527
mstrozier wrote: the link shows port 3357 however it appears ETC was rolled up into the other lower memory ethash algo coins under port 3358. When I switched to port 3358 it works.We’re not aware of any case where etchash would have been included with other low-memory coins; there are many miners mining etchash right now
mstrozier · · #96528
Thanks Steve, Christopher replied to the ticket that this has affected several users before but apparently it’s a bug in the miner not the pool. I switched from Phoenixminer5.3b to gminer and so far gminer seems to be working. No errors and no rejected shares since making the switch.
sendmedoge · · #96529
No more callisto payout or just temporary?
has started a new topic: duplicate username error
has started a new topic: Unable to login to Support page to place a ticket
Vetheon · · #96532
Day 2 of trying to convince Prohashing to bring us Veles Network Mining... Please guys? Pretty please?
has started a new topic: Negative Balance..?
vxinvest · · #96534
blue3 wrote:vxinvest wrote: I followed exactly the "getting started" video on Youtube but I get an error " connect to prohashing.com:3339 - access refused - can anybody help please ?Can you share the configuration & miner name + version?
vxinvest · · #96535
Exactly how it’s shown in this YT Video: https://www.youtube.com/watch?v=04PZcJ3qfxQ
vxinvest · · #96536
here are the worker configurations: https://prnt.sc/132xoz1
vxinvest · · #96537
and my mine_eth.bat line is like that: miner.exe --algo ethash --server prohashing.com:3339 --user vxcryptomine --pass a=ethash,w=250,p=0.1,n=vxinvest pause
vxinvest · · #96538
I’m using the latest version realeased gminer_2_54_windows64
sonicrules · · #96539
Is there any way we can get the USD value of each coin balance in the rest api or at least the value of the coin that the website is using?
blue3 · · #96540
vxinvest wrote: and my mine_eth.bat line is like that: miner.exe --algo ethash --server prohashing.com:3339 --user vxcryptomine --pass a=ethash,w=250,p=0.1,n=vxinvest pauseHave your Firewall turned off? I’m using gminer too and my connection is fine even my ping to prohashing is around 270ms
vxinvest · · #96541
Oooops, I forgot the firewall... It’s working fine now that it’s off! Thanks for your help Blue3
Alynn · · #96542
Suggestion. Add miner.exe to your exemption list instead of disabling the firewall.
has started a new topic: Ergo Mining
has started a new topic: Setting up a Gridseed 5-Chip Orb GC3355
bonedout · · #96545
all my miners wouldnt connect last night lost me money why everytime im able to make a profit mining somthing goes wrong on this site?
Vetheon · · #96546
Day 3 of trying to convince Steve to add Veles Network mining to Prohashing. Please Steve??
sonicrules · · #96548
I think there is something wrong with the coin usd values in the dashboard right now
sonicrules · · #96549
Yep, something is definitely wrong. My balance in USDC is suddenly worth 0 USD.
Nosferatu272 · · #96550
quick question: ethash-lowmemory or etchash mining on 4gb vram GPUs? ethash or etchash on 8gb vram GPU?
sobebob · · #96551
password recovery without email address?
has started a new topic: Password reset without password
bonedout · · #96553
withdraws messed up its makeing me wait 48 hrs for a withdraw to happen instead of the 24 hrs
Vetheon · · #96554
Day 4 of trying to convince the Prohashing admins to add Veles mining. Pleaseeeee?
Steve Sokolowski · · #96555
Vetheon wrote: Day 4 of trying to convince the Prohashing admins to add Veles mining. Pleaseeeee?We’re going to add Chia mining first!
Qsnyder11 · · #96556
Was there an issue for payout early this AM?
aljulius1 · · #96557
Qsnyder11 wrote: Was there an issue for payout early this AM?I have the same issue but just with Coinbase payouts.
sonicrules · · #96558
aljulius1 wrote:Same here.Qsnyder11 wrote: Was there an issue for payout early this AM?I have the same issue but just with Coinbase payouts.
chasran01 · · #96559
Yes - it would appear there may be an issue... My LTC payout is still pending. Although I did get $2 from the merged mining part of it, just not the motherlode I’m waiting on.
sonicrules · · #96560
Looks like the REST API shows yesterday’s earnings too. I guess That’s why the dashboard still says I’ve reached the threshold today.
Ilovecoffee · · #96561
Also no payouts here, doge still pending (non-coinbase). Just came to check the forums if anyone else was experiencing the same thing.
mstrozier · · #96562
I didn’t get my payouts either last night. They are still showing as the transaction is pending.
bachel · · #96563
same still waiting on ltc
has started a new topic: Chia and the Pool
Onachukwu · · #96565
Pls i am new to mining. I have set up my prohas
Onachukwu · · #96566
I have set up my prohashing account and tried to connect with GPU but it keep telling me no device found. Pls what do i do
bachel · · #96567
recived payout just now thx
Qsnyder11 · · #96568
Still no payouts on my end. Shows only 1 of my 5 pending
mstrozier · · #96569
The 2 payments on my end have just posted.
-MaVerick- · · #96570
payment can take up to 24h depenting on market fluctuations if I am not mistaken. a few days ago it also took some hours, but it will always be payed out sooner or later
sonicrules · · #96571
-MaVerick- wrote: payment can take up to 24h depenting on market fluctuations if I am not mistaken. a few days ago it also took some hours, but it will always be payed out sooner or laterWhen that happens, there is timer on the dashboard. For me the timer isn’t doing anything, and remaining coins to payout right next to it says 0.
Qsnyder11 · · #96572
I see the timer now. But its only 1 coin. Guess ill wait see what happens
sonicrules · · #96573
Now that I’m looking at mine, the timer isn’t there. Just the 0 coins remaining and the $0.00 total remaining.
Peopleonlinellc · · #96574
Newbie here. Have a question. I’m configured to mine FPPS mode. In the ProHash portal I see block rewards achieved, do I receive a those earnings displayed?