Chat archive · 2021-08
awb1 · · #98334
Does anyone know how long is usually takes a Nilu block to mature? I have several from yesterday that still show Immature.
has started a new topic: Support for support tickets
-MaVerick- · · #98336
bMeister1 wrote: *snip* my hashrate looks horrible compared to the hashrate I get on EtchashYou cannot compare to algos just be the number of the hashrate, can you? My 3060 is doing 110+MH on Ergo but can reach up to 50MH without the artificial break. That still doesnt say much about the profit, which is roughly the same
-MaVerick- · · #98337
*two
-MaVerick- · · #98338
and *by....jesus, I should stop typing
-MaVerick- · · #98339
and on ETH with the 50MH, wow sorry. Work is taking its toll on me
bMeister1 · · #98340
-MaVerick- wrote:That is a good point, actually. I should have said that the hashrate to value ratio ($ per MH/s) seemed to be really off from what people were saying about RVN. Since RVN has been rising in value, I should go back and see what I can get doing KAWPOW again. I’d much rather do that here on FPPS instead of PPS over at places like zergpool though, so add my vote for adding RVN here. lolbMeister1 wrote: *snip* my hashrate looks horrible compared to the hashrate I get on EtchashYou cannot compare to algos just be the number of the hashrate, can you? My 3060 is doing 110+MH on Ergo but can reach up to 50MH without the artificial break. That still doesnt say much about the profit, which is roughly the same
steve_empire · · #98341
Is anybody here in this forum gonna mine the "Chia Algo" when it becomes available on Prohasing?
-MaVerick- · · #98342
I will wait for RVN to be available here someday and try it out. Checked Ergo but tbh I am too lazy for that and I like my stuff concentrated on one place, until then Ethash is the way to go for my 2 GPU unless it goes into deeply red territory
-MaVerick- · · #98343
haven’t read myself into that chia stuff yet but space is usually not something I can spare easily with this PC being a gaming PC after all
Alynn · · #98344
steve_empire wrote: Is anybody here in this forum gonna mine the "Chia Algo" when it becomes available on Prohasing?I’m thinking about buying a couple plots for the heck of it, but I’m not doing to be making my own.
josep01972 · · #98345
does anyone know how fast the "turbine" (like the ones on the FE cards) fans are supposed to spin?
dhandler01 · · #98346
steve_empire wrote: Is anybody here in this forum gonna mine the "Chia Algo" when it becomes available on Prohasing?I think I am. I already farm Chia (has 2!) so depending how it works and if it is profitable I am gonna try
josep01972 · · #98347
I can’t for the life of me find a reference on what the RPM should be for the blower type cards. I was wondering what people where seeing in theirs.
-MaVerick- · · #98348
if it helps, gigabyte 3060 is doing 3300RPM on 100%
josep01972 · · #98349
-MaVerick- wrote: if it helps, gigabyte 3060 is doing 3300RPM on 100%Does it use the 1 fan blower type cooling?
-MaVerick- · · #98350
sadly no, that long lazy disapointment got 3 of them
josep01972 · · #98351
-MaVerick- wrote: sadly no, that long lazy disapointment got 3 of themI think that might be my problem with the blower type card... I see it run at 3200 rpm max, but if your 3060 runs at 3300 rpm I would imagine mine should run even higher...Kinda thinking the fan is broken.
Sumoblei · · #98352
i have a few R&’s that max at 3600 rpm... ill have to check my 1070 to see
Sumoblei · · #98353
Sumoblei wrote: i have a few R7’s that max at 3600 rpm... ill have to check my 1070 to see
bMeister1 · · #98354
My R9 380 caps out at 3200, not sure about my old 1050Ti. I know there is a certain point where once you get past a certain speed that the coolers literally cannot transfer heat any faster so 3600RPM sounds about right.
josep01972 · · #98359
bMeister1 wrote: My R9 380 caps out at 3200, not sure about my old 1050Ti. I know there is a certain point where once you get past a certain speed that the coolers literally cannot transfer heat any faster so 3600RPM sounds about right.I’ll take 3600, though. I’m sure there is a steady state, but surely it can’t be 3600 rpm. The PLB06625B12HH fan is rated for 5000 rpm...
bMeister1 · · #98360
josep01972 wrote:Sure it can hit that high, but radiators can only release so much heat per second so there comes a point where it’s not going to cool any faster unless the temp of the air drops and even then you’re still looking at diminished returns. If you really want to keep a GPU ice cold, you have to water cool it.bMeister1 wrote: My R9 380 caps out at 3200, not sure about my old 1050Ti. I know there is a certain point where once you get past a certain speed that the coolers literally cannot transfer heat any faster so 3600RPM sounds about right.I’ll take 3600, though. I’m sure there is a steady state, but surely it can’t be 3600 rpm. The PLB06625B12HH fan is rated for 5000 rpm...
has started a new topic: question about pplns stats
josep01972 · · #98362
bMeister1 wrote:I would like to keep it below 70C...josep01972 wrote:Sure it can hit that high, but radiators can only release so much heat per second so there comes a point where it’s not going to cool any faster unless the temp of the air drops and even then you’re still looking at diminished returns. If you really want to keep a GPU ice cold, you have to water cool it.bMeister1 wrote: My R9 380 caps out at 3200, not sure about my old 1050Ti. I know there is a certain point where once you get past a certain speed that the coolers literally cannot transfer heat any faster so 3600RPM sounds about right.I’ll take 3600, though. I’m sure there is a steady state, but surely it can’t be 3600 rpm. The PLB06625B12HH fan is rated for 5000 rpm...
-MaVerick- · · #98364
looks like ADA got a new ATH, curious how far it will go
Alynn · · #98365
So yeah every algo and coin can have different time to block. So that is why for awhile I was using Equahash 144,5 as it was better than Ethash.
Banished_Privateer · · #98366
Glad having my ADA. Moon is the limit and beyond.
-MaVerick- · · #98367
well, I’m not regretting putting 50 euro in it, thats for sure
dhandler01 · · #98368
yeah adding a 10% payout here in Cardano when Musk crashed the market is paying off for me now
has started a new topic: Impending discontinuation of Coinbase dollar payouts
bMeister1 · · #98370
SOL has also been skyrocketing for a lot longer than I was expecting. I bought a litte over 1 SOL for $30 a month ago and it’s worth over $90 right now.
josep01972 · · #98371
Alynn wrote: So yeah every algo and coin can have different time to block. So that is why for awhile I was using Equahash 144,5 as it was better than Ethash.Do you have software to decide to switch automatically?
Alynn · · #98372
josep01972 wrote:No. I just knew my average Sol rate and my average hash rate was 2.415 so if Eth was ever less than 2.415 the price 144,5 I’d close it out and click on my other .bat file. One of the perks of working from home.Alynn wrote: Snipped...Do you have software to decide to switch automatically?
-MaVerick- · · #98373
I guess those flashy numbers up there are also a good indication of what to pick depending on the hardware
Sumoblei · · #98374
True, but asics are hard to compete with
Banished_Privateer · · #98375
on ETH minining
Banished_Privateer · · #98376
has started a new topic: Memory module failed
has started a new topic: Ethash and PPLNS questions
Sumoblei · · #98384
Go ADA!
dhandler01 · · #98385
Looks like an ETH Happy Hour!
Banished_Privateer · · #98390
Still waiting on the UST-9964, should be easy resolution according to Chris.
bachel · · #98392
anyone having proplems connecting to eu servers ?
has started a new topic: Disconnect notification?
aakanab · · #98394
00:03:18 Connect to eu.prohashing.com:3339 Failed: Connection timed out 00:03:18 All user mining pools are unavailable
has started a new topic: Minerbox - iOS and Android App Prohashing Integration Released
Steven Godshall · · #98396
ETH mining about to go offline for ~3-5 minutes to update our ETH client.
Steven Godshall · · #98397
ETH update complete.
Nosferatu272 · · #98398
eu servers seems to be down for some reason
Banished_Privateer · · #98400
We crossed 10P mined on ETH block
Sarah Manter · · #98401
Nosferatu272 wrote: eu servers seems to be down for some reasonThey were down for a bit because Our hosting provider for the EU machine was moving it to another server, but it’s back up and running as of last night.
has started a new topic: Prohashing using Hiveos
has started a new topic: High orphan rates on FPPS Ethash
sonicrules · · #98404
Looks like there’s something wrong with USDC
Steve Sokolowski · · #98405
sonicrules wrote: Looks like there’s something wrong with USDCFeel free to submit a support ticket with the specifics and we’ll be glad to help!
has started a new topic: Mining server restart today
sonicrules · · #98407
I don’t think it’s specific to me, I think USDC is in error right now
sonicrules · · #98408
Where do we ask for support now? I cant, find it in the drop down menus on the main site.
sonicrules · · #98409
*can’t
-MaVerick- · · #98410
You can also use email or a social media of your choice -> https://forums.prohashing.com/viewtopic.php?f=4&t=8081
-MaVerick- · · #98411
link to the ticket system is still on the website here and there, just not in the dropdown menu
sonicrules · · #98412
Thanks
sonicrules · · #98413
Is usdc in error for anyone else right now?
-MaVerick- · · #98414
according to coinbase I’m not allowed to trade USDC...can’t help you there, sry
-MaVerick- · · #98415
didn’t even know that some coins are geoblocked?
Kaffiend · · #98416
Usdc and dai were both in the error for me A few minutes ago but it has fixed itself now
Steve Sokolowski · · #98417
Chris is working on the stablecoin errors, and hopes to have more information within 4 hours.
Timmy1992 · · #98418
I just wanted to ask when is the payout?
Timmy1992 · · #98419
I dont see any wallet request or anything regarding payment
Timmy1992 · · #98420
Please do correct me if im wrong..
Alynn · · #98421
Payouts usually happen within 24 hours after meeting the threshold. For stuff like coinbase it happens for me around 1-3 in the morning CST.
Timmy1992 · · #98422
Alrite.. thank you...
Alynn · · #98423
Timmy1992 wrote: I dont see any wallet request or anything regarding paymentThis is all set in your payout tab. You choose your percentages and what you are getting paid out. You input your addresses there.
Timmy1992 · · #98425
Sorry alyn,i quote it wrong.. What i mean is.. the payment detail.. which
Timmy1992 · · #98426
Hi alll.. wanna ask if there’s any other payment method??
-MaVerick- · · #98427
what exactly are you thinking about? You got lots of coins to choose from
has started a new topic: Announcement on the Horizon
-MaVerick- · · #98429
announception goes into round 2 
Sumoblei · · #98430
:o
Timmy1992 · · #98431
Hmmm.. not recving anything?
Timmy1992 · · #98432
Anyhow late?
Timmy1992 · · #98433
Hello??? Anyone
-MaVerick- · · #98434
Take a look here https://forums.prohashing.com/viewtopic.php?f=4&t=8081 and contact the prohashing team. There you can give all the information they need to help you
-MaVerick- · · #98435
also this might help: https://prohashing.com/help/setting-mining-payouts
-MaVerick- · · #98436
uuuuh ethash happy hour!
dhandler01 · · #98437
-MaVerick- wrote: uuuuh ethash happy hour!YUP! Holy crap this is way better than this morning!!
-MaVerick- · · #98438
45min of joy 
if we could keep this up for a few days it would help me getting closer to a better GPU
if we could keep this up for a few days it would help me getting closer to a better GPUSumoblei · · #98439
better than sexorz
jreysack · · #98440
-MaVerick- wrote: uuuuh ethash happy hour!seen it was up to over 17c/mh/s/d for a few moments.
jreysack · · #98441
odocrypt is way up there at the moment. 332.8c /gh/s/d O.o
has started a new topic: Trusted mining question
has started a new topic: Forums to be upgraded today
Murr808 · · #98444
how much of the ETH pool hashrate actually belongs to Prohashing??
sonicrules · · #98446
Looks like we’re having some issues with php
sonicrules · · #98449
Yep
sonicrules · · #98452
I think what Murr808 meant was how much of ethereum’s total hashrate belongs to prohashing
Steve Sokolowski · · #98453
All of the miners connected to Prohashing are in the ethash statistics
Steve Sokolowski · · #98454
there are no other pools that miners connect to
-MaVerick- · · #98456
test test