Chat archive · 2021-08
afkluckky · · #98009
They took the lock off the cards? updated drivers or somthing?
-MaVerick- · · #98010
not completely, but we’re getting there
-MaVerick- · · #98011
but that long and lazy noisemaker is finally noticable more efficient than a 1060 6GB
Farren · · #98015
I have a new S19j Pro, which is running over 100TH average. I put it in PPLNS mode to mine BTC all day on August 1st, and the earnings this morning are $.05 : When it was in ProSwitching mode the day before it earned $31.84. I read that the PPLNS can take some time to show up, so maybe that is why? Does anyone have an opinion or experience with that?
ToeKnee · · #98017
@Farren, I have a S19Pro and I can report the same; I believe that in PPLNS mode, it’s an all or nothing thing. If you find it, everyone hits pay dirt according to the % they contributed. If nothing’s found, nothing’s paid -- except for the occasional trickles from merge mining.
Alynn · · #98018
In PPLNS you get nothing (outside of merge mined) until a block is found. And you are rewarded with the % of the reward that you contributed. The website breaks this all down really well.
Steven Godshall · · #98019
Ethereum about to go offline for ~2-5 minutes to upgrade for the Ethereum London Fork
-MaVerick- · · #98020
looking good
Steven Godshall · · #98021
Ethereum upgrade complete.
bMeister1 · · #98022
So if I understand the changes in the London Fork correctly, Ethash will still run in PoW mode for awhile right? At least until that difficulty bomb makes it extremely unprofitable?
Farren · · #98023
Hey all ---- thanks for the confirmation on the PPLNS - It also helped to watch that video about it on You Tube, which was informative as well. I’ll keep playing the lottery in PPLNS for now. Thanks.
Steve Sokolowski · · #98025
bMeister1 wrote: So if I understand the changes in the London Fork correctly, Ethash will still run in PoW mode for awhile right? At least until that difficulty bomb makes it extremely unprofitable?We’ll continue mining Ethereum until they change to proof-of-stake - if they ever do
dhandler01 · · #98026
any updates on Chia pooling? I have a few terabytes looking for some fun 
solarminer · · #98027
Farren wrote: Hey all ---- thanks for the confirmation on the PPLNS - It also helped to watch that video about it on You Tube, which was informative as well. I’ll keep playing the lottery in PPLNS for now. Thanks.I’m loving the BTC PPLNS lottery. Makes things "Fun" again. Started to feel like a Crypto 9 to 5 job
-MaVerick- · · #98029
damnit ethash, stop rising. gotta take my pc offline in an hour for upgrades
Sumoblei · · #98030
keep hashing :P
dhandler01 · · #98031
wow Ethash is having a moment...
solarminer · · #98032
We need more people on the BTC PPLNS pool. Let’s get PAID!!
-MaVerick- · · #98033
well, doesn’t look that painful anymore to go offline. Let’s get that Ryzen to work
ElectricEnigma · · #98034
Steve Sokolowski wrote:I read somewhere that even after 2.0 is live that they will still need new ether to support the staking... or did I misinterpret what they meant?bMeister1 wrote: So if I understand the changes in the London Fork correctly, Ethash will still run in PoW mode for awhile right? At least until that difficulty bomb makes it extremely unprofitable?We’ll continue mining Ethereum until they change to proof-of-stake - if they ever do
Ser75 · · #98037
Steve Sokolowski problem acounr
Ser75 · · #98038
When I log in, I get an incorrect username or password, although I enter them correctly
Steve Sokolowski · · #98040
Ser75 wrote: When I log in, I get an incorrect username or password, although I enter them correctlyPlease submit a support ticket and we’ll be glad to help!
Ser75 · · #98041
I can’t create a ticket because I can’t enter suport
Sumoblei · · #98042
What time does London Bridge fall?
jreysack · · #98043
Sumoblei wrote: What time does London Bridge fall?https://etherscan.io/block/countdown/12965000
Sumoblei · · #98044
ty ty
Murr808 · · #98045
solarminer wrote: We need more people on the BTC PPLNS pool. Let’s get PAID!!i’m on it but I only have 350GH/s lol
sonicrules · · #98046
I never got my payout and it’s been more than 24 hours
sonicrules · · #98047
The countdown timer is in the negatives.
afkluckky · · #98049
mooncoin
afkluckky · · #98050
Murr808 wrote:got about 25TH on it! woosolarminer wrote: We need more people on the BTC PPLNS pool. Let’s get PAID!!i’m on it but I only have 350GH/s lol
Sumoblei · · #98051
:o :twisted:
sonicrules · · #98052
Finally got my coinbase card
sonicrules · · #98053
Also, look how profitable ethash is right now
Banished_Privateer · · #98054
When was the last time we found ETH block?
Syracc · · #98055
@banished .. seems a little while ago, waiting for it too
has started a new topic: shares still arrive even when solo
afkluckky · · #98059
Ser75 wrote: I can’t create a ticket because I can’t enter suportits a different login
afkluckky · · #98060
well someone just beefed up the hashrate on Bitcoin PPLNS today because my % is dropping all the sudden lol
josep01972 · · #98061
Why is ETH so profitable right now?
Steve Sokolowski · · #98062
there’s an error in the mining servers that is incorrectly crediting money to customers for ETH
Steve Sokolowski · · #98063
Chris plans to correct it soon, but you can make more money for the next hour
-MaVerick- · · #98064
ethash happy hour? hell yeah! 
-MaVerick- · · #98065
I think I never saw a customer service say something like "yeah we got an error in our system, but go ahead and benefit from it while we fix it" It shows that you care for us <3
-MaVerick- · · #98066
even the little ones with some GPUs
Steve Sokolowski · · #98067
it’s fixed now, by the way
Steve Sokolowski · · #98068
but some people made some money while it lasted
has started a new topic: Big announcements coming this Tuesday!
josep01972 · · #98070
is there a way to switch to a different payment exactly at the beginning of the day? I want to switch from getting paid in Doge to ETH, but I don’t want to have scraps amount of Doge left when I switch... Anyone know hoe to do it?
Alynn · · #98071
josep01972 wrote: is there a way to switch to a different payment exactly at the beginning of the day? I want to switch from getting paid in Doge to ETH, but I don’t want to have scraps amount of Doge left when I switch... Anyone know hoe to do it?Wait until it says you are elegible for a payout, if you are then switch, you will get paid all of the doge you are owed (provided it stays above the threshold)
bMeister1 · · #98072
Quick question, I did some PPLNS Monero mining awhile back and the pool just found that block today (finally!) but I’m a bit confused because it’s showing my share of the block as Monero in Payouts and not split among my payout options. Is is gonna convert to what I have set or do I need to have my Exodus wallet set up an address to receive it?
Alynn · · #98073
PPLNS and solo pays in the coin you are mining
bMeister1 · · #98074
Alynn wrote: PPLNS and solo pays in the coin you are miningAh, that makes sense. I was operating under the assumption that payout options were absolute.
Syracc · · #98075
Hey, quick question, what could be the reason that my RX 580 has a local hashrate of 27 MH/s, but the Prohashing portal only shows me 19-21 MH/s? Does this have anything to do with the difficulty level which is dynamic?
Steve Sokolowski · · #98076
Syracc wrote: Hey, quick question, what could be the reason that my RX 580 has a local hashrate of 27 MH/s, but the Prohashing portal only shows me 19-21 MH/s? Does this have anything to do with the difficulty level which is dynamic?We can only determine your hashrate by how many shares you submit, and probably what’s happened is you had an unlucky period of finding shares. Wait for four hours and see if there is still a difference.
has started a new topic: New API endpoints available
Syracc · · #98078
Steve Sokolowski wrote:Watched it now for several hours - in median I’m at 21 MH/s with the card, I mean - I could’t be that unlucky or?Syracc wrote: Hey, quick question, what could be the reason that my RX 580 has a local hashrate of 27 MH/s, but the Prohashing portal only shows me 19-21 MH/s? Does this have anything to do with the difficulty level which is dynamic?We can only determine your hashrate by how many shares you submit, and probably what’s happened is you had an unlucky period of finding shares. Wait for four hours and see if there is still a difference.
-MaVerick- · · #98080
Syracc did you test a different mining program? both of my nvidia gpu are very close to what the site is calculating
afkluckky · · #98081
Syracc wrote:check the graph on the mining page for that card. if you dont see it bouncing above 25 ever then you might be overheating the card and its throttling itself down. Check the hotspot temp if its pegged at 82 then it might be throttling itself. I could be wrong but I encountered this with my AMD cards specifically the 580Steve Sokolowski wrote:Watched it now for several hours - in median I’m at 21 MH/s with the card, I mean - I could’t be that unlucky or?Syracc wrote: Hey, quick question, what could be the reason that my RX 580 has a local hashrate of 27 MH/s, but the Prohashing portal only shows me 19-21 MH/s? Does this have anything to do with the difficulty level which is dynamic?We can only determine your hashrate by how many shares you submit, and probably what’s happened is you had an unlucky period of finding shares. Wait for four hours and see if there is still a difference.
Murr808 · · #98082
for mining ETH what’s better PPLNS or FPPS ?
Murr808 · · #98083
the estimated profit per day is exactly the same in the configurator
Sumoblei · · #98084
https://www.youtube.com/watch?v=DlQ2FQozwqI <<< here Murr808
Murr808 · · #98085
Sumoblei wrote: https://www.youtube.com/watch?v=DlQ2FQozwqI <<< here Murr808thanks
Murr808 · · #98086
where can i find out how many blocks prohashing finds on eth ??
Murr808 · · #98087
i dont see prohashing on etherscan anywhere
Sumoblei · · #98088
Murr808 · · #98089
looks like assigned hashrate is down a bit, was around 85 GH/s a few weeks ago
Murr808 · · #98090
with such a low hash rate i’m guessing they don’t find blocks to often
has started a new topic: Best Algo for limited RTX3060
Ilovecoffee · · #98092
How is ethash for everyone since the hardfork? Especially yesterday I’m down about 25% in terms of mined ETH. The increased value has offset in terms of $ but still...hope it’s not all downhill from here.
-MaVerick- · · #98093
well according to the numbers up there we are pretty stable and not too bad compared to some days over the last month.
-MaVerick- · · #98094
I can’t really compare it yet because I just ripped out my old Xeon for a Ryzen9, which is not too bad on RandomX
-MaVerick- · · #98095
looking at equihash, i wonder how that 3060 would perform on that. Doesn’t look to bad profit wise
Murr808 · · #98096
is everyone switching to Zcash ?
Murr808 · · #98097
anyone know if Prohashing is going to allow mining RVN ??
-MaVerick- · · #98098
I sure hope so, they are expanding their crew to get more stuff going
Murr808 · · #98099
yeah need more options for the end of ETH mining
Ycdocs120 · · #98100
I have 2 l3+ . They are using the same connection. Is this gonna work?
NearlyDeparted · · #98101
Murr808 wrote: yeah need more options for the end of ETH miningAgreed, we could use RVN and ERG
Banished_Privateer · · #98102
ERG is prominent, more than Ravencoin.
Ilovecoffee · · #98107
RVN’s market cap is almost 4x more than ERG.
afkluckky · · #98108
On the Ticket system the required description field I am not able to type in. Just a chrome issue maybe?
afkluckky · · #98109
Ah shows up with multiple refreshes
josep01972 · · #98110
why is the ETH payout threshold so expensive ?
Ilovecoffee · · #98111
After all this time, I didn’t realize I needed to UNDERCLOCK my GTX 1060 Super because it had Hynix memory. Underclocking it made it go from ~20MH/s to 31.7MH/s
josep01972 · · #98114
Ilovecoffee wrote: After all this time, I didn’t realize I needed to UNDERCLOCK my GTX 1060 Super because it had Hynix memory. Underclocking it made it go from ~20MH/s to 31.7MH/sAre you talking ETHASH? 31.7 seems very high! What did you underclock to?
Aurislion · · #98116
Does anyone in here understand how to set up the ANON wallet? I could use a little help please. I get an "error setting up params: null" message. I am using a Mac. I will try the standard removing and reinstalling, but in two days it was still attempting to install params before that message popped up. Thanks for any and all help.
mHxLegacy · · #98117
I haven’t been able to find a working wallet for ANON either, got a small amount sitting here that’s been annoying me for weeks
bMeister1 · · #98118
josep01972 wrote: why is the ETH payout threshold so expensive ?ETH fees are pretty high so the threshold where the pool covers the network fee is set higher to compensate for that.
has started a new topic: Free transaction thresholds adjusted
Ilovecoffee · · #98120
josep01972 wrote:Yes Ethash. It’s a 6gb card. I underclocked the core clock and memory clock to the max allowed by MSI Afterburner. About -500 or so for each.Ilovecoffee wrote: After all this time, I didn’t realize I needed to UNDERCLOCK my GTX 1060 Super because it had Hynix memory. Underclocking it made it go from ~20MH/s to 31.7MH/sAre you talking ETHASH? 31.7 seems very high! What did you underclock to?
Sumoblei · · #98121
I wonder if that applies to my 1070 gtx ftw........
jreysack · · #98122
Sumoblei wrote: I wonder if that applies to my 1070 gtx ftw........Maybe, look at invidia inspector to see the memory
has started a new topic: BTG pplns luck?
Ilovecoffee · · #98124
jreysack wrote:You can see the link below, basically Hynix performs better underclocked on this particular card and Samsung performs better overclocked. It’s not always the case for Hynix memory however. https://www.bitcoinminershashrate.com/gtx-1660-and-1660-ti-mining-benchmarks-tuning-overclocking-and-hashrate/Sumoblei wrote: I wonder if that applies to my 1070 gtx ftw........Maybe, look at invidia inspector to see the memory
has started a new topic: Monero Pool showing no connection
josep01972 · · #98128
Ilovecoffee wrote:Did not apply to my cards. I have micro and samsung. Best I get is 21 and 19josep01972 wrote:Yes Ethash. It’s a 6gb card. I underclocked the core clock and memory clock to the max allowed by MSI Afterburner. About -500 or so for each.Ilovecoffee wrote: After all this time, I didn’t realize I needed to UNDERCLOCK my GTX 1060 Super because it had Hynix memory. Underclocking it made it go from ~20MH/s to 31.7MH/sAre you talking ETHASH? 31.7 seems very high! What did you underclock to?
-MaVerick- · · #98129
you also got GTX1060s? Mine was also weird to get by with afterburner but I got it stable with 23+. Also samsung if I’m not mistaken
-MaVerick- · · #98130
core +200 memory +650 and powerlimit at 70%