Chat archive · 2018-04
mycide · · #83122
also hard to downclock them as it doesnt effect the voltage, or so i read, and the experience from downclocking my D3’s to get more stable running just presented the opposite.
mycide · · #83123
big paperweights, the PSU prob brings more money on ebay then the asic.
Lestat9 · · #83124
So the mining aspect of the system is working again?
holygoof · · #83125
yes, the fiber is connected and extra servers added Lestat
travelinmusic · · #83126
Steve Sokolowski wrote:I remember it like it was a minute ago, you sent images that were not viewable and made a bullshit story that it was sent when i clearly showed that it was not. It was closed because you closed it but i 100% DO NOT AGREE!travelinmusic wrote: I still want my $50 bucks they stole back in December... They will but your ticket on hold for 3 months and then take your money.This ticket was resolved a long time ago. Please check the system if you don’t remember it.
Steve Sokolowski · · #83127
travelinmusic wrote:If you want to discuss the issue further, feel free to submit a support ticket - but I do believe that in this case, the resolution was in fact not in your favor for reasons discussed in the previous ticketSteve Sokolowski wrote:I remember it like it was a minute ago, you sent images that were not viewable and made a bullshit story that it was sent when i clearly showed that it was not. It was closed because you closed it but i 100% DO NOT AGREE!travelinmusic wrote: I still want my $50 bucks they stole back in December... They will but your ticket on hold for 3 months and then take your money.This ticket was resolved a long time ago. Please check the system if you don’t remember it.
Lestat9 · · #83128
is the coin name used in c= for deutche emark "emark"it doesnt seem to be working
Lestat9 · · #83129
hey steve great site you have here
Lestat9 · · #83131
c=emark doesnt work anyone know the name used for emark on command line
ZiGen · · #83132
99.88% efficiency ...SUPER ...
LMC · · #83133
Lestat9 wrote: c=emark doesnt work anyone know the name used for emark on command line
LMC · · #83134
Lestat9 wrote: c=emark doesnt work anyone know the name used for emark on command lineThis works on more than Deutsche eMark: Go to the main site. Select the EXPLORER tab. Select the coin you want. Under "General Information..." it tells you exactly what to use.
Lestat9 · · #83135
thx
CSZiggy · · #83136
Lestat9 wrote: c=emark doesnt work anyone know the name used for emark on command lineHow to mine prohashing.com:3333, password "c=Deutsche_eMark"
CSZiggy · · #83137
@LMC : That block explorer method is pretty cool, with the dropdown to find the coin, but it lacks the algo info of the coin on the explorer. I prefer using the LIVE COIN STATUS and click the ALGO then NAME so I can see all the coins that algo can mine. Explorer page is missing which algo the coin is minable on.
CSZiggy · · #83138
Deutsche_eMark btw is SHA-256, so you need one of those miners to mine that coin.
Lestat9 · · #83139
I have a s7 4.7TH
Lestat9 · · #83140
Thinking about the S9 14 TH
Lestat9 · · #83141
cant connect to mining server
has started a new topic: No Miners Are connected
has started a new topic: [BOUNTY][Airdrop] Bitupper bounty campaign
starcat · · #83144
Steve are you available to answer one quick question?
has started a new topic: L3+ power usage to productivity is untenable
has started a new topic: Status as of Sunday, April 8, 2018
akinawa · · #83147
It may be worth adding the Lyra2REv2 algorithm. Last time it is more profitable
oppresseddude · · #83149
website says no miners are connected but my miners are still passing in shares. Any ideas?
mclarney2535 · · #83150
My account is still saying no miners connected as well.
Steve Sokolowski · · #83151
mclarney2535 wrote: My account is still saying no miners connected as well.I can’t reproduce this issue - is there still a problem now, or did this go away?
fundough · · #83152
settings, if deleting a coin what happens to the balance on that coin?
oppresseddude · · #83153
now it says ’undefined’ under live worker status
nacos · · #83154
when VERGE will be minable again?
bridlord · · #83155
mine too. all miners undefined. take a look Steve, my account is the same as my user name.
alexis97 · · #83156
No miners are connected, Mining Efficiency - 100%, earned for 3 hours 1 $ (l3)
Steve Sokolowski · · #83157
nacos wrote: when VERGE will be minable again?we don’t know - after it has been stable for enough time to justify the risk
Steve Sokolowski · · #83158
over $12,000 was lost the last time
shieldwolf · · #83159
Many kudos to Steve and Chris for their hard work! Everything good on this side! All interfaces working well, still waiting for Ripple payout resolution....but I understand the wait. Will check back occasionally 
shieldwolf · · #83160
Helotours · · #83161
14 out of 41 showing up and "undefined"
ezgoing1 · · #83162
no workers, but 100% efficiency
CSZiggy · · #83163
has the pool hit over 18K workers since it came back up or is there a connection limit in place?
Helotours · · #83164
I have 41 workers mining and connected via GUIs but made $1 last hour. I’ll give it a couple hours
CSZiggy · · #83165
did chris fix that issue on the new servers where at install it set less connections then max?
CSZiggy · · #83166
@Helotours : solo? static or autopool?
CSZiggy · · #83167
what kind of miners? x11? sha?
Helotours · · #83168
Auto, 14 SHA256 and others are Scrypt
Helotours · · #83169
undefined: 189.421 T/s (41)
CSZiggy · · #83170
@Steve Sokolowski : </strong> the level of service is now sufficient such that all miners can return. We have capacity for around 45,000. Limit still in place? It's not gone over 18K yet.
CSZiggy · · #83171
If you can't go over 18K or 21K kinda hard to say if the upgrades fixed the issues, since they didn't start to pop up til we had that many or more on the system.
CSZiggy · · #83172
@Helotours : and used the a=sha-256 password on the sha machines and left it default scrypt on the others.
CSZiggy · · #83173
you have them setup right, just the display page is off?
Helotours · · #83174
I’ve been mining here a long time - yes, all that’s correct. All miners undefined
CSZiggy · · #83175
just have 1 and it seems to show up with all info correctly
CSZiggy · · #83176
maybe using more than 1 or using 2 algos makes it undefined?
CSZiggy · · #83177
ohh 18K workers
CSZiggy · · #83178
and back under. still think there is some limit in place.
ezgoing1 · · #83179
currently says: undefined: 1.067 G/s (2)
Helotours · · #83180
I’m pulling mine off. Later
CSZiggy · · #83181
if you reboot one of them, while its offline if you refresh the page with only 1 miner does it give infos?
CSZiggy · · #83182
EZ?
CSZiggy · · #83183
@Helotours : laters
Steve Sokolowski · · #83184
CSZiggy wrote: If you can’t go over 18K or 21K kinda hard to say if the upgrades fixed the issues, since they didn’t start to pop up til we had that many or more on the system.I think that the connection limit returned
Steve Sokolowski · · #83185
there’s some linux setting that does that
Steve Sokolowski · · #83186
but I can’t contact Chris about it, he isn’t responding
Steve Sokolowski · · #83187
so once he responds, I’ll work on it
CSZiggy · · #83188
my fear....he has to be at the server to make those changes?
CSZiggy · · #83189
or can they be increased remotely?
CSZiggy · · #83190
I thought the config for that had to be done ahead of booting the server up, like cant change once running type of setting, might be wrong
CSZiggy · · #83191
I kinda think its funny, the static cherry picker miners are prolly all shouting and throwing things at monitors since they find they cant reconnect 20 times per minute to hit donation coin or whatever is at the top currently
Steve Sokolowski · · #83192
CSZiggy wrote: my fear....he has to be at the server to make those changes?he needs to be able to log into it
Steve Sokolowski · · #83193
he’s on the pennsylvania turnpike right now
CSZiggy · · #83194
cool so can change it remotely then
Steve Sokolowski · · #83195
still 2.75h away
Steve Sokolowski · · #83196
not while he’s driving though
CSZiggy · · #83197
yeah understandable, didnt expect him to hit a hojo and find wifi to change it then drive the rest of the way 8)
CSZiggy · · #83198
I'm not a slave driver.
CSZiggy · · #83199
just would hate to find he got home and has to turn around to drive back in order to fix it
CSZiggy · · #83200
long as its remote fixable its all gravy.
Steve Sokolowski · · #83201
I’m very close to getting this issue with the luck
Steve Sokolowski · · #83202
it’s amazing how much data can reveal
CSZiggy · · #83203
i would just find a lower diff coin and static mine it for a few hours til I found a few blocks to make it go away?
CSZiggy · · #83204
Im dying to read the info posted on what was causing it, how its being fixed, stopped from happening in future
CSZiggy · · #83205
will make for good reads im sure.
CSZiggy · · #83206
I almost wanted to be a low-luck miner so I could play and test...but getting daily payouts is good also. Felt bad for newer miners that got hit with low-luck and arent used to the pool and its rules and its professionalism.
ezgoing1 · · #83207
Still no luck on identifying miners. I’m patient ill wait a few hours and check back. Happy Sunday all!
CSZiggy · · #83208
with just 1 going it finds and displays all the data for me
CSZiggy · · #83209
multi-miner issue?
mclarney2535 · · #83210
@CSZiggy- yea i think there is a issue with the display and multi-miners. I have 2-SHA256 and 2-X11’s and its showing 1 X11, 1 SH256 and 2 undefined.
ezgoing1 · · #83211
is it an L3 issue? it’s my last two L3’s that I left on pro hashing to monitor it.
CSZiggy · · #83212
@ezgoing1 : if you only had 1 L3 on the account, does it display all the info? is it only with more than 1 that it goes undefined I guess was the thinking of the testing.
Steve Sokolowski · · #83213
mclarney2535 wrote: @CSZiggy- yea i think there is a issue with the display and multi-miners. I have 2-SHA256 and 2-X11’s and its showing 1 X11, 1 SH256 and 2 undefined.I think it’s the connection limit problem
Steve Sokolowski · · #83214
once Chris arrives, I’ll ask him to resolve the issue as quickly as possible
Steve Sokolowski · · #83215
he is still 1:55 out though
ezgoing1 · · #83216
I disconnected one to reset and it said 1 undefined, then other rebooted and it either says no miners, or 2 undefined.
cincyhashman · · #83217
I am seeing the same issue with my brand new L3+.
egik · · #83218
It says that my L3+ is undefined.
starcat · · #83219
The Status page at https://prohashing.com/person.html is totally jacked up
starcat · · #83220
not to mention having run all day and showing about $1.58 of earnings on an L3+
starcat · · #83221
horrifying
oppresseddude · · #83222
live worker status is still wonky but earnings normal.. as normal as it gets these days 
oppresseddude · · #83223
although it makes you wonder if one part isn’t working who is to say what it tells u for earnings is any good.