Chat archive · 2017-11
confusedjtag · Fri Nov 10, 2017 12:10 PM UTC
two days in a row did you guys use my hashing power for your upgraded servers or what?
confusedjtag · Fri Nov 10, 2017 12:14 PM UTC
no valid shares for one of my miners connected
djliss · Fri Nov 10, 2017 12:50 PM UTC
@confusedjtag i dobut they would compensate, it is down to the induvidual to set up backup pools, my miners have failed over a few times in the past couple of days with the PH issues and user cap
djliss · Fri Nov 10, 2017 12:51 PM UTC
user cap is annoying as i get connected most of the day but come tea time uk i couldn’t get on due to user cap, dunno if my net is dropping or it is a coin switch causing it
djliss · Fri Nov 10, 2017 12:54 PM UTC
not too botherd though as litecoinpool pays pretty well, granted not as much as PH, but still ok, at least i’m earning something!!!
mickeekung · Fri Nov 10, 2017 01:00 PM UTC
Hello Share become more stale again in past hour.
pavvappav · Fri Nov 10, 2017 01:18 PM UTC
BTC is dropping, time to get in before the teathers prop it up.
CryptoTiger · Fri Nov 10, 2017 01:48 PM UTC
anyone else think the Antminers look like the trap from Ghostbuster?
sharpblunt007 · Fri Nov 10, 2017 02:05 PM UTC
@djliss that’s what I was doing the other day, but the problem is it doesn’t fail over, it just keeps submitting stale shares
mickeekung · Fri Nov 10, 2017 02:09 PM UTC
I just noticed that Steve has the red name in the forum.
mikey · Fri Nov 10, 2017 02:21 PM UTC
What’s the recommended d= setting for D3 antminer?
bellaminer · Fri Nov 10, 2017 02:28 PM UTC
Anyone waiting on Nov1-10 batch of L3s? No notice of shipment and its already 11/11 in China
fugju · Fri Nov 10, 2017 02:48 PM UTC
bellaminer wrote: Anyone waiting on Nov1-10 batch of L3s? No notice of shipment and its already 11/11 in China FIFO
confusedjtag · Fri Nov 10, 2017 02:57 PM UTC
My miners keep switching not having shares and not having any hash rate this is not right. Steve please look into this thanks
confusedjtag · Fri Nov 10, 2017 02:57 PM UTC
or else I will be forced to switch pools and advise all my partners to do the same thanks
AppleMiner · Fri Nov 10, 2017 02:58 PM UTC
you know they work during the day at their day jobs right?
AppleMiner · Fri Nov 10, 2017 02:58 PM UTC
they arent here 24-7 to read this
confusedjtag · Fri Nov 10, 2017 02:59 PM UTC
no need for that lol good day
fugju · Fri Nov 10, 2017 03:17 PM UTC
confusedjtag wrote: no need for that lol good day lol, mining should only allowed be after reaching 18 years...
AppleMiner · Fri Nov 10, 2017 03:19 PM UTC
if it saves Steve from reading another message about issues he is aware of by now...Ill be the dick and take one for the team no probs.
AppleMiner · Fri Nov 10, 2017 03:23 PM UTC
ohhhhh miss poland is kinda cute.
Gilou34 · Fri Nov 10, 2017 03:27 PM UTC
I am new, 4 days on PH only. What is the best d= for an L3+? Thanks in advance.
AppleMiner · Fri Nov 10, 2017 03:28 PM UTC
may have to play and find what is best for each of your machines
sharpblunt007 · Fri Nov 10, 2017 03:29 PM UTC
no need for "or else I will be forced to switch pools and advise all my partners to do the same thanks" either @confusedjtag, guarantee you that you and your partners leaving won’t make any difference
AppleMiner · Fri Nov 10, 2017 03:30 PM UTC
sure it will! the 100 people behind them in line all get to move up and get a spot to mine on the pool sooner
Gilou34 · Fri Nov 10, 2017 03:32 PM UTC
FYI i am in europe and the 2 "normal" days I got 0.29 and 0.30 LTC.
AppleMiner · Fri Nov 10, 2017 03:32 PM UTC
mine are mostly OCed and I get right around .33 a day
AppleMiner · Fri Nov 10, 2017 03:33 PM UTC
which adds up to over 7 LTCs a day
djliss · Fri Nov 10, 2017 03:48 PM UTC
only been on the pool a few days just got my L3+, only just got back into mining in the last 2 weeks but i’m earning about $11 a day roughly £10 a day, think i have a faulty hashing board no3 board has no input temp and a x on the last chip. do these profits sound about right appleminer?
AppleMiner · Fri Nov 10, 2017 03:49 PM UTC
for the past 2 days if you were on here yes
AppleMiner · Fri Nov 10, 2017 03:49 PM UTC
there were issues the past 2 days, seems much better today
AppleMiner · Fri Nov 10, 2017 03:49 PM UTC
should have been getting like 18, think I got 12 per machine past 48 hours
AppleMiner · Fri Nov 10, 2017 03:50 PM UTC
so it was down for me anyways like 50%
AppleMiner · Fri Nov 10, 2017 03:50 PM UTC
but some of that could be out on my backup pools
AppleMiner · Fri Nov 10, 2017 03:50 PM UTC
I did have disconnects and a bit of downtime here so may not be off a full 50%, 20% might be hanging out in other places
AppleMiner · Fri Nov 10, 2017 03:51 PM UTC
it will all flow into my wallet in a day or two im sure, or not
djliss · Fri Nov 10, 2017 03:56 PM UTC
yeah my thaughts exactly, it is what it is lol, mined about 0.1 on litecoinpool so have to add that in if i can be botherd to do the maths
djliss · Fri Nov 10, 2017 03:57 PM UTC
regarding the antminer, does that sound like it has an issue with the hashing board?
djliss · Fri Nov 10, 2017 03:59 PM UTC
0.01 on litecoin pool lol, thaught it was a bit much
AppleMiner · Fri Nov 10, 2017 04:03 PM UTC
do they all show up, all 4 boards?
AppleMiner · Fri Nov 10, 2017 04:04 PM UTC
do they all have 2 pci-e plugs in solid
AppleMiner · Fri Nov 10, 2017 04:04 PM UTC
make sure the white cord is in tight
djliss · Fri Nov 10, 2017 04:05 PM UTC
yeah all in tight, using the bitmain psu with it
AppleMiner · Fri Nov 10, 2017 04:06 PM UTC
see if the X at the end goes away
AppleMiner · Fri Nov 10, 2017 04:06 PM UTC
thats what that board has high HW errors
djliss · Fri Nov 10, 2017 04:07 PM UTC
i suspect the previous owner oc the hell outta it and then put it on fleebay, said it was located in liester uk and was shipped from estonia!!! put in a return on fleebay and he hasn’t replyed, iv’e said it is faulty so should recive a refund all being well.
sharpblunt007 · Fri Nov 10, 2017 04:08 PM UTC
Yea, and maybe try manually set your fan to keep the temp below 60 for a while, I had all my boards show xxxxx and that’s how I fixed it
AppleMiner · Fri Nov 10, 2017 04:08 PM UTC
its still working at 500, id be happy with it
djliss · Fri Nov 10, 2017 04:09 PM UTC
its been off once when i moved it from work to home and same thing, loads of h/w errors and the x on last chip, the x did dissapear at one point but after i took it home, came back on and hasn’t dissapeared
djliss · Fri Nov 10, 2017 04:09 PM UTC
so all the h/w errors arn’t to be worried about then
AppleMiner · Fri Nov 10, 2017 04:09 PM UTC
is the safety seal still over the fan screw in the back?
AppleMiner · Fri Nov 10, 2017 04:10 PM UTC
no the HW errors are from that X on the 3rd hashboard
AppleMiner · Fri Nov 10, 2017 04:10 PM UTC
and its not dropping you enough to really care
AppleMiner · Fri Nov 10, 2017 04:10 PM UTC
.2% nounce is still fine, just doubt you would be able to OC that one at all.
sharpblunt007 · Fri Nov 10, 2017 04:10 PM UTC
Yea those HW errors are a lot, and yea it’s weird that it’s just 1 chip, but yea I agree with Apple, you’re still getting 500 so don’t fiddle too much. I have my fans manually set to keep temp below 60, but I’ve also OC’d to 570 MH/s
AppleMiner · Fri Nov 10, 2017 04:11 PM UTC
but for a stock 500, thats getting 500 so it should be fine
AppleMiner · Fri Nov 10, 2017 04:11 PM UTC
I have my fans set to go whatevery the need to go at to cool
djliss · Fri Nov 10, 2017 04:11 PM UTC
not sure will look when i get home, still at work, work on an IT support desk but specialise in infrastructure so i’m no noob lol
AppleMiner · Fri Nov 10, 2017 04:11 PM UTC
i have them on auto but its like 50 in the room so they arent going past 3000 right now
djliss · Fri Nov 10, 2017 04:12 PM UTC
yeah its getting hot in my room, running 3 gridseed blades and 2x1070ti and a 1080 in there on full pelt too lol
sharpblunt007 · Fri Nov 10, 2017 04:12 PM UTC
Yea I live in SA and it’s summer at the moment so my ambient temps are between 25 - 30 degrees celcius during the day, that’s why I manually set
AppleMiner · Fri Nov 10, 2017 04:13 PM UTC
hope it stays that way all day
mycide · Fri Nov 10, 2017 04:13 PM UTC
just started one of my D3’s and for 5 hours it already have 500 HW over 3 boards
sharpblunt007 · Fri Nov 10, 2017 04:13 PM UTC
Yea I have an exhaust tube on the back fan to blow hot air out
AppleMiner · Fri Nov 10, 2017 04:13 PM UTC
the D3s came OCed to hit 19 and 17 gh
mycide · Fri Nov 10, 2017 04:13 PM UTC
def OC from factory, but it seems a bit to high, even some of my L3+ have far less with OC
AppleMiner · Fri Nov 10, 2017 04:13 PM UTC
and tbh i didnt much care for the temps, was like 77 out of the box
AppleMiner · Fri Nov 10, 2017 04:14 PM UTC
there is only 3 boards on a D3 not 4 like L3+
mycide · Fri Nov 10, 2017 04:14 PM UTC
so how does that make it better, it makes it worse.
AppleMiner · Fri Nov 10, 2017 04:14 PM UTC
turn the D3s down 2 frew settings
djliss · Fri Nov 10, 2017 04:14 PM UTC
i dont need to run the tumble dryer anymore, just hang the clothes in there now lol
AppleMiner · Fri Nov 10, 2017 04:15 PM UTC
HW errors are perfectly fine and normal
AppleMiner · Fri Nov 10, 2017 04:15 PM UTC
you dont have to get them to 0 and having them is fine
mycide · Fri Nov 10, 2017 04:15 PM UTC
yeah i probably will clock it down a step or two, but gonna keep running for 24h stock on each to see what genarates.
AppleMiner · Fri Nov 10, 2017 04:15 PM UTC
as long as its not 100s per second
mycide · Fri Nov 10, 2017 04:15 PM UTC
hehe, ofc, double to tripple digit over 24h i consider acceptable.
sharpblunt007 · Fri Nov 10, 2017 04:16 PM UTC
Yea HW errors I get about 10 per hour in total with my OC
mycide · Fri Nov 10, 2017 04:16 PM UTC
based on nothing but guessing ^^
AppleMiner · Fri Nov 10, 2017 04:16 PM UTC
if its under .1 its good for me
AppleMiner · Fri Nov 10, 2017 04:16 PM UTC
keep the temps at 60 or lower and keep the nounce at .1 or lower and keep OCing mine til I hit 1 of those 2
AppleMiner · Fri Nov 10, 2017 04:17 PM UTC
dont think i set any to be 469 freq
