Chat archive · 2017-04

the lost blocks rate was only 20%, and most of it came from one DASH orphan

Steve I just mining with X11 and all of the found block stat show lost. Is it normal?

Chris discovered that that one particular coin wasn’t an x11 coin

but he disabled it

so don’t worry about that

also bitcoin balance is not updating. Or you’re not finish updating?

try refreshing the page

OK. I’ll try but it’s still freezing at this moment.

hi. x11 work now? balance norm add coins?

Looks like x11 is working right now but the balance still weird.

balance not work yestaday. miners do mining but coins not add

mickeekung wrote: Looks like x11 is working right now but the balance still weird.

weird?

now work x11?

for some reason i cant solo mine certain coins... bunnycoin for instance

stiv

I mean balance still not be updated.

The balances are only updated every few shares, so if you won’t see it update frequently if you don’t submit lots of shares.

My balanced is not be updating for 1 day. TT (ID:mickeekung)

It’s freezing at the same as payout balance.

x:11 now 5,21 ¢ . Baikal 900mh/s how mutch must earned 24 Hours?

tmopar wrote: for some reason i cant solo mine certain coins... bunnycoin for instance

Look at those coins in the "coin status" chart and see if they have errors next to them. Do they?

crazyq3 wrote: x:11 now 5,21 ¢ . Baikal 900mh/s how mutch must earned 24 Hours?

it’s 5.21 times 900, or about $47

yes. 18.04i stay 2xBaikal 900. 3-4 Hours. And recive 0.17 $

Bunnycoin has occasional lost blocks due to its charity blocks (which we can’t mine). It will go into error for one block after that charity block is lost, which will cause you to be unable to solo mine for that time.

was bug or server trabl?

are you solo mining with that hashrate?

no . not solo

a=x11 d=1 was in pass

me too I think I have the same problem as @crazya3 but I rent all miners from MRR.

i not rent. its my i write on miner parametrs

can u help me with miners what need write for correct working? I can give u Team viwer

i keave 1 baikal x=11 d=1 900Mh/s . and go sleep. pay out stay 100 % in dush. See plz on my account. Crazyq3 name on pool

Are you even able to connect with Mining Rig Rentals? When we experimented, we weren’t able to get Mining Rig Rentals working with the X11 pool.

Yes Of cause I can connect all of the miner that I rental.

I will give you the pictures in Private Message.

I’ll look into the earnings in about an hour. Going to eat dinner now.

Have a nice delicious dinner.

Oh I forgot to tell you. I still didn’t get paid for 4/18/2017 too.

Chris - it works with MRR. All of my x11 rigs are connected via MRR and 1.8GH of my rigs was point here the last 24 hours showing the proper hash rate. Of course, I wasn’t paid for it as you know... I sent an email to contact@ this morning with no response.

How’s it going BTW? Hope you are well. Chatted with Steve earlier a bit.

I think we found the issue with X11. X11 difficulties are 2^16 lower than scrypt, but our database is paying X11 miners the same rate as scrypt. Therefore, your earnings are 2^16 lower than they should be. I am fixing the code right now, and I will recalculate the X11 earnings after the code is released and credit everyone at the correct rate. You can continue mining now; those earnings will be corrected too.

The reason some people are seeing zero balances is because our website reports a precision of 8, and therefore the incorrectly low balances round to zero.

Thanks Chris.

bunny

Chris Sokolowski wrote: I think we found the issue with X11. X11 difficulties are 2^16 lower than scrypt, but our database is paying X11 miners the same rate as scrypt. Therefore, your earnings are 2^16 lower than they should be. I am fixing the code right now, and I will recalculate the X11 earnings after the code is released and credit everyone at the correct rate. You can continue mining now; those earnings will be corrected too.

Corrected? I havent seen any reflection on my balance.

it good. and when u will fix this?

This issue block earning to payout too,isn’t it?

X11 hashrate just increase from around 4-5 GH/s to 20-21 GH/s now. Seems like more miners want to mine your pool.

mickeekung wrote: X11 hashrate just increase from around 4-5 GH/s to 20-21 GH/s now. Seems like more miners want to mine your pool.

I have connected mine, but for 1 hour, i made 0.00000018 btc

which is stupid.

i will give it a try solo mining for another 2 hours and see what will happen, otherwise, will not give it a try anymore

x11 - rejection rate is very high- around 700 MH/s til now, out of 20- and my 20 GH are not even being counted, it showed maximum of 14.8 until now.

So- 1h:2m avg. hashrate 14.9 GH/s- dynamic diff, normal mining = profit: 0.00000022 btc

now switching to solo x11

avgswsiss wrote: So- 1h:2m avg. hashrate 14.9 GH/s- dynamic diff, normal mining = profit: 0.00000022 btc

I’ll be writing about this soon. The earnings are off by a factor of 65536.

We figured out the problem and should be able to push a fix soon.

In the meantime, if you are mining x11, the amount you will be paid is your balance * 65536

Whats up with scrypt now when using Nicehash?

Talk about frustration! I agree to support the Litecoin segwit signal, setup orders on Nicehash with c=Litecoin , all worked fine for hours, I turn my back a while and all is gone to hell again with high rejects/stale and eventual auto-cancelled order

Just please let me know if any settings changed, I’ve tried to support through all these changes but the coin supply has all but dwindled away to the point that I cant anymore

Steve - when trying to set an order form Nicehash, it seems multiple connections result and keep adding, until it finally disconnects. I end up very quickly with 3 or 5 Litecoin connection windows in the "Earnings" section, then Nicehash monitoring shows high reject/stale/penalties , huge hash speed delta, then order is auto-cancelled

FRISKIE wrote: Talk about frustration! I agree to support the Litecoin segwit signal, setup orders on Nicehash with c=Litecoin , all worked fine for hours, I turn my back a while and all is gone to hell again with high rejects/stale and eventual auto-cancelled order

By any chance, does that happen after you found a Litecoin block?

Also, does this ever happen when you are using direct miners, or just through NiceHash?

Hi Steve, it’s the same with other coins too, I tried a c=gamecredit to test and same results. Seems multiple conenctions, or rapid drop and re-establish , so I end up quickly with several windows for that connection on the "earnings" page, then the stale/rejects start , and then connection drops completely

Sad thing is that it was working flawlessly until this morning Europe time, had a look before leaving to work, all looked fine and stable.

By the time I checked again a couple of hours later all had gone wrong, if any changes were implemented this morning they appear to have negatively impacted Nicehash scrypt mining

Steve Sokolowski wrote:

avgswsiss wrote: So- 1h:2m avg. hashrate 14.9 GH/s- dynamic diff, normal mining = profit: 0.00000022 btc

I’ll be writing about this soon. The earnings are off by a factor of 65536.

Steve- when do you expect to get this corrected?

FRISKIE wrote: By the time I checked again a couple of hours later all had gone wrong, if any changes were implemented this morning they appear to have negatively impacted Nicehash scrypt mining

There were no changes made this morning, so this must be a preexisting bug. After we correct x11 earnings, we’ll rent some NiceHash rigs and test.

Ok Steve, sorry for a moments frustration there

Steve: Rejected hashrate 1.494 GH/s on x11, with static d=1.4 m=solo

what have you set initial diff to expect on x11?

avgswsiss wrote: Steve: Rejected hashrate 1.494 GH/s on x11, with static d=1.4 m=solo

What is the error message for the rejected shares? Also, did you use c= with m=? You can't use m= without also using c=.

FRISKIE wrote: Ok Steve, sorry for a moments frustration there

Does this only happen with c=?

Just curious about coinbase payouts, when do those happen?

Steve Sokolowski wrote:

avgswsiss wrote: Steve: Rejected hashrate 1.494 GH/s on x11, with static d=1.4 m=solo

What is the error message for the rejected shares? Also, did you use c= with m=? You can’t use m= without also using c=.

Both primary and merge mined shares are stale

Steve Sokolowski wrote:

avgswsiss wrote: So- 1h:2m avg. hashrate 14.9 GH/s- dynamic diff, normal mining = profit: 0.00000022 btc

I’ll be writing about this soon. The earnings are off by a factor of 65536.

When are you expecting to correct this?

Steve Sokolowski wrote:

FRISKIE wrote: Ok Steve, sorry for a moments frustration there

Does this only happen with c=?

a=x11 m=solo c=Dash d=1.7

Steve Sokolowski wrote:

avgswsiss wrote: Steve: Rejected hashrate 1.494 GH/s on x11, with static d=1.4 m=solo

What is the error message for the rejected shares? Also, did you use c= with m=? You can’t use m= without also using c=.

a=x11 m=solo c=Dash d=1.7

avgswsiss wrote:

Steve Sokolowski wrote:

avgswsiss wrote: Steve: Rejected hashrate 1.494 GH/s on x11, with static d=1.4 m=solo

What is the error message for the rejected shares? Also, did you use c= with m=? You can’t use m= without also using c=.

Both primary and merge mined shares are stale

You forgot to answer the other question, though - are you using "c=" with "m="?

just did

can’t you give an answer of the x11 corrections and compensations from 2 days ago?

Ok Steve- my question is just being ignored. so i will permanently move away my x11

avgswsiss wrote: can’t you give an answer of the x11 corrections and compensations from 2 days ago?

Chris was tasked with this but hasn’t replied to my message. Before we can do this, we need to fix the development database, which ran out of disk space, so I can only say that Chris is working on it as quickly as possible, probably by tonight

Steve - the earlier question about c= , I have not tried Nicehash lately without setting the coin, the reason being the penalties for fast switching are huge

I was asking earlier for recommendations with h= values, if this would possibly slow down the switching a bit, but I asked my question at a bad time and it got lost

Are coinbase payouts broken?

jinxorbit wrote: Are coinbase payouts broken?

Yes, because Coinbase hasn’t replied to our customer support requests. We’re going to make a big fuss about it soon.

I think the stale shares with NiceHash are a result of a problem with not getting the latest blocks; I have a fix for that but am waiting for Chris to deal with the problem of the development database running out of disk space

once the database is back online, then it will stop blocking the x11 payouts issue as well

steve... i just wanted to make sure I am not doing something wrong... I was hitting some nice blocks on a coin solo and then all the sudden that coin is unminable freezing with a stratum error

however other coins are minable...

Just released a fix for the X11 earnings.

Mining server is restarting

I will fix previous balances soon

now will work?

u need test

or need test*

I tested it myself on the development server, but you can confirm it here as well