Chat archive · 2018-06

Well it’s an ASIC equihash and a lot of folks are having issues connecting to pools with it so I just assume there is some sort of preparation that has to be done on the pool maintenance side.

Yep - It’ll align more with other asic miners until stuff starts forking if they are going to fork

I’m talking about current data! As soon as you begin to infringe on the interests of people your hashrai falls !!!

You must give equal opportunities to all people! Do they have their own equipment or rent they power on nicehash !!!

Leave the time in seconds !!!! Real data !!!

Your income is falling very much !!! Do everything to work with Niceshash !!! Soon and so all will turn off all their equipment !!! Do not lose the market !!!

Funny, all I saw was the excessive use of exclamation marks.

anyone else not getting 10kSol with Z9 ? started with 10 but leveled out at about 8 kSol only. Anyone same experience

Mine rocked 11kSol out of the box

Due to the delay of real-time data, the Niehash miner has lost money. Please resume as soon as possible, thank you!

The nicehash miner should increase the mine pool income, and there is no conflict with other miners. Because of the limited system of Nicehash, and the cost of expensive order removal, the Niehash miner is unable to switch between different coins using robots, and can only modify the speed limit of the Niehash order through timely and prompt profit data. Nicehash miners digging in prohashing is the default for mine pools. Our password is the simplest, just set it as: a=X11.

Question: The payout thresholds for Bitcoin when the account is linked to coinbase aren’t available to change. Is there a default or does it just pay out what is earned at the end of each day with no fees?

nevermind - figured it out

Is Zcash mining broken because of the updates to zcash? Says unable to obtain latest block from Daemon when you look at live coin status.

network hash rate is WAY down, so looks like it has impacted a bunch of folks

ANYBODY HERE THAT CAN HELP ME, please?

hello

I have an L2+ setup here mining ltc. I’d like to setup another L3+ to mine Verge, how do I set that up since I only have 1 account?

hello

I have an L3+ setup here mining ltc. I’d like to setup another L3+ to mine Verge, how do I set that up since I only have 1 account?

Hi, all you need to do is set your payout coin to Verge on the Settings page. You can connect all your miners to the same account, and if you like, you can specify a "name" for them in the password field like n=l3-001, etc

if you want to SOLO mine verge, check the Help Page to find the settings on how to do that

not solo mine Verge

but there will be 2 miners under the same name. Obviously the argument n="Anything i want to name it" will allow me to distinguish each miner. correct?

yes

My concern is that Prohasing will be using all hashing power towards one coin

if you assign it to one coin, I believe that is correct

for example, I already have 1 miner up and running here but my paying out is set to "Ethereum". (Which of course i know is a different algo, but Prohashing allows us to get paid in any coins)

the help page has detailed instructions on tuning your miner to certain coins

right - regardless of what you are mining, I believe you get paid in what you select in settings, but you’d have to confirm with the help page.

c: sets a static coin to mine to support that coin’s network. When this argument is included, the miner will only be assigned work mining the requested coin, and will not switch coins when the rest of the pool is directed to switch coins. To mine CHNcoins only, for example, use "c=chncoin." This argument is case-insensitive. The selected coin must be spelled exactly as those in the list of available coins on the homepage, and the coin must not be in error. If the mined coin is placed into an error state (for example, if the coin forks and mining temporarily stops), then the pool will disconnect the miner rather than assign it to a new coin. This behavior allows powerful ASICs to specify a backup pool for when their preferred coin is not available. When used in conjunction with the d= (static difficulty) argument, the coin’s difficulty overrides the static miner difficulty when the coin’s blocks are easier than the static miner difficulty. Since the purpose of static coin mining is to allow customers to mine on a single network, static coin mining is limited to one coin per IP address per period of time. The amount of time required between mining a static coin and being allowed to switch to the next coin varies. Prohashing’s terms of service prohibits the creation of automatic software to switch between static coins, because doing so may reduce the profitability of dynamic coin miners. Manually configuring software to mine one static coin for long periods of time is allowed. The c parameter can be used to support particular coins that the customer wants to increase the hashrate of. Static mining coins are independent of payout coins, so it is possible to mine any coin and be paid out in any coin (or in multiple coins.) This option can replace single-purpose pools for available coins; instead of having to direct hardware at a specialty pool that mines 42 coins and pays out in 42 coins, miners can be configured to support the 42 network at Prohashing and receive consistent pay-per-share payouts in 42 coins daily.

Now for me to add a 2nd miner to mine let’s say Verge, i’m afraid Prohashing will consider all the hashrate for just 1 coin, or

I’m a little concerned we’re missing out on the zcash mining right now while the network has rates are down, but ohh well.

I wanna make sure that each miner’s power is used to generate their respective coin.

stratum+tcp://prohashing.com:3333#xnsub worker: Mike d=101760 n=L3+

will this be a good setting?

what miner do you have

solidnetmoney you can specify individual rigs to mine solo, both static coin or in pps. i suggest not solo mining unless you know what you are doing, stick to pps, let prohashing to their thing, and then go play with the payout settings and sliders, and get the coins u prefer.

What happend to equihash stratum today?

My Z9’s wont work on this pool anymore :/

says pool alive but 0 hash, regular zec pools work fine

Prohashing still broken?

Equihash down for me still

and the folks that run the pool are no where to be found

how about letting folks know what is going on

Any reason live profitability still shows Equihash but we cant connect?

probably still hashing and earning them money

cryptotore wrote: Prohashing still broken?

Chris restarted the mining server earlier today to resolve some issues, around this time

it took a few minutes - I apologize for the short downtime

is Equihash working now?

dj2381 wrote: is Equihash working now?

There’s 511KS/s on Equihash right now

Miner is connected but I get 0 hashrate?

Why does zcash still show "Unable to obtain the latest block from Daemon" in live coin status?

Hello?

so Mining ZEC directly works fine, I have completely turned off my miner and restarted only to still be stuck on 0 hashrate for Equihash?

Seem to be back online now? Zcash overwinter issues?

I’m guessing it is overwinter issues

ah I see it is, thanks, thought my miner was broken for a min

ZEC and ZCL are the most profitable right now according to whattomine, so sucks we can’t mine the coins

jeffms2003 wrote: ZEC and ZCL are the most profitable right now according to whattomine, so sucks we can’t mine the coins

They are most likely the most profitable because most pools are unable to mine them after whatever happened last night

Most of the static coin pools that do ZCash are up and running. It wasn’t an algo change.

jeffms2003 wrote: Most of the static coin pools that do ZCash are up and running. It wasn’t an algo change.

It’s not an algorithm change; it’s either that we have an old version of ZCash running or there has been some change in the transaction format - Chris is looking into it now

with the upgrade I and to update my wallet. Here is the link I used, I am not sure how that works on this site vs an individual.

what is the minimum for free payout for erc20 tokens? how does it work? would it be the same min free default as an eth payout?

ahh ok I can see it for Golem but zil has a max threshold of 0

can someone explain to me about solo mining. When i find a blk do i automaticlly get paid or do i have to work the blk to get paid

see this page and search for solo - read all the entries... https://prohashing.com/help.html

afterwards, happy to help, but someone has already written all this out...

Steve, Chris, I’m getting notices again about finding tons of blocks (4 and 5) so rebooting (Scrypt)

... not all are showing in the list, but perhaps we are luckier because so many have switched their off

Zcash Activates Overwinter Hard Fork The network upgrade went live at block 347,500, which was mined on Tuesday, June 26, at approximately 1:37 UTC.

Zcash Activates Overwinter Hard Fork The network upgrade went live at block 347,500, which was mined on Tuesday, June 26, at approximately 1:37 UTC.

Need admin to manually payout my MONK balance please - its stuck.

CSZiggy wrote: Co I’ve had the main page opened for over 8 hours now, still the share recorder #2 does not show up on the main charts page. IS this a display issue or is a server offline not counting accurate shares?

It’s not showing up because it’s not online - but that’s not a problem because load isn’t high enough to require it right now

I don’t know why it’s not online but the zcash issue is a higher priority and the share recorder being offline isn’t losing any money

Steve Sokolowski wrote:

dj2381 wrote: is Equihash working now?

There’s 511KS/s on Equihash right now

Is it possible to use Z9 mini here for Equihash?

@ Splinter yes, I plugged my Z9 in today

no issues so far, just using port 3336

it is not too much to assing the dynamic difficulty to the equihash miner?

@holygoof :  Thanks, mate

difficulty now 2,097,152

hello admin why cant i contact support? i need my monk payout my account name = this username

account name cretinous

Anyone else showing dead status on scrypt?