Chat archive · 2017-10

lmatrading · · #36544

Curious to know what everybody L3+ are pulling in each day

graelb · · #36545

I’m pulling roughly 20/day with my single L3+

lmatrading · · #36546

Cool and you are on this pool ? directed only on LTC mine anything ??

lmatrading · · #36547

*or mine anything*

lhfx21 · · #36548

if I understand correctly the 1 MH/s expected payouts chart mining X11 automatic is less profitable than mining Dash

lhfx21 · · #36549

?

bellaminer · · #36550

L3+ generates 17-20/day

caosmen · · #36551

pool is down ? 0 shares here

greenhorn0815 · · #36552

My LTC payout has not occurred, its counting but it wont pay out, are payments stopped and why? was there a official announcement about the problem?

bellaminer · · #36553

no official announcement yet, but someone said its being worked on

greenhorn0815 · · #36554

ok, they need to be more transparent, a simple message is enough, people get anxious regarding payouts

greenhorn0815 · · #36555

I am new here, moved over with a small farm to PH, was a while with MD but that did not work out well

bellaminer · · #36556

usually Steve is quick to put up a message

bellaminer · · #36557

not sure why they are so slow today

greenhorn0815 · · #36558

Its been a while, i reached threshold like 16 hours ago

greenhorn0815 · · #36559

will wait, i read enough to know that they do not screw anyone over

Foldmine · · #36560

lmatrading wrote: Curious to know what everybody L3+ are pulling in each day
$20 each per day for the last days

greenhorn0815 · · #36561

I can confirm $20, what is your diff setting?

greenhorn0815 · · #36562

i am running at 32768 atm, i tried 65 and 131 with lots of rejects and found this to be better, anyone had a similar experience?

elanvital · · #36563

TY
Maxiimos wrote:
elanvital wrote: New miner here, hello all. Is the +/- %50 fluctuation in Scrypt pay rate normal? One minute its 2.50¢, the next its 5.33¢,
this is due to problems with the site, downtime, etc

elanvital · · #36564

About $21. Bloody diffculty rate increased 3.5x since I pre-ordered it. Unbelievable.
lmatrading wrote: Curious to know what everybody L3+ are pulling in each day

Foldmine · · #36565

greenhorn0815 wrote: I can confirm $20, what is your diff setting?
default - no password arguments apart from n=

mck · · #36566

elanvital wrote: TY
Maxiimos wrote:
elanvital wrote: New miner here, hello all. Is the +/- %50 fluctuation in Scrypt pay rate normal? One minute its 2.50¢, the next its 5.33¢,
this is due to problems with the site, downtime, etc
*NO*, this is *NOT* due to problems with the site. This is the best thing about this site: the mining is switching between different coins all the time to get the maximum profitability!!!\

greenhorn0815 · · #36567

I tried default, but it would set me up to 525k, i guess normal for vardiff, what is your complete string? i have it empty

Foldmine · · #36568

I’m on 525k for one and 262k for another. But it’s dynamic if it’s on default right?

mck · · #36569

@elanvital: Profitablity of one coin is fluctuating continuously. Check out https://www.coinwarz.com/cryptocurrency, check one coin and 5min later press F5 (refresh) to see how it has changed.

greenhorn0815 · · #36570

yeah no entry = vardiff = fluctuates automated, i got told everywhere else not to do that for L3+

GregoryGHarding · · #36571

most l3+’s work well with d=131072

greenhorn0815 · · #36572

had lots of rejects, 95% efficiency running on 131k

greenhorn0815 · · #36573

97.6% on 32k

Foldmine · · #36574

Just watching the livechat over a few days I’ve seen everyone trialing different different difficulties and coming up with the same kind of revenue as mine on vardiff. I’m really new though, so don’t take my word for it

greenhorn0815 · · #36575

yeah i need to get deeper into it, since there is no consent about the correct number, maybe for multi pools there is no perfect number since we mine various coins with various difficulties

greenhorn0815 · · #36576

makes sense to have vardiff but the question is, is this vardiff optimized for these miners?

Foldmine · · #36577

greenhorn0815 wrote: makes sense to have vardiff but the question is, is this vardiff optimized for these miners?
Well put it this way - when people have been posting up their daily income from L3’s, I haven’t seen any significantly higher than mine - apart from a couple of days ago when the pool was messed up and people were doing well @2048

Bitatlas · · #36578

Guys, don’t worry about the payouts. Sometimes there are delays because of technical problems. However, Steve and Chris always solve the issues.

greenhorn0815 · · #36579

true that, the result counts

Splinter · · #36580

Steve, whats going on?!

nolazybits · · #36581

yeah it seems the pool is dead

nolazybits · · #36582

thought it was just me but NaN on home page for hashing power

CritterDog · · #36583

They should put a signal on the front page on if site is up or down since we never get info when this happens

GregoryGHarding · · #36584

@greenhorn0815 :  32k is too low for an L3+ submitting too quickly, 65536 or higher

gtorukawa · · #36585

pool been DOD all day

greenhorn0815 · · #36586

yes, but how come i have better efficiency with 32k? i tested 32k 65k 131k over a span of days

GregoryGHarding · · #36587

CritterDog wrote: They should put a signal on the front page on if site is up or down since we never get info when this happens
they do.. "Last share processed: 12:44:14 PM"

GregoryGHarding · · #36588

@greenhorn0815 :  have you modified your clock settings?

GregoryGHarding · · #36589

@GregoryGHarding :  is it a used L3

GregoryGHarding · · #36590

@GregoryGHarding :  i cant answer your question without knowing everying about your L3+, they are not cookie cutters, they have "personalities"

vinylwasp · · #36591

GregoryGHarding wrote: @GregoryGHarding :  i cant answer your question without knowing everying about your L3+, they are not cookie cutters, they have "personalities"
ROFL, you mean they’re erratic, unstable and unreliable

GregoryGHarding · · #36592

@vinylwasp :  sounds like my ex gf

greenhorn0815 · · #36593

yeah pool is dead

gtorukawa · · #36594

Has anyone compared the returns from proshashing.com vs litecoinpool.org?

centar · · #36595

if any of you want to try something else, I’m on track to make about $36/day at http://zpool.ca with one L3+ overclocked to 550 mh

gtorukawa · · #36596

@centar How long have you run your L3+ at overclock 550mh?

greenhorn0815 · · #36597

36 would be fine...

centar · · #36598

2 weeks
gtorukawa wrote: @centar How long have you run your L3+ at overclock 550mh?

gtorukawa · · #36599

@centar :  NO overheating issues?

Foldmine · · #36600

gtorukawa wrote: Has anyone compared the returns from proshashing.com vs litecoinpool.org?
I redirected to litepool.org last time PH went down - made a little less over there than here.

centar · · #36601

no, but it’s helped that the weather has cooled off where i am

gtorukawa · · #36602

@centar :  nice thanks! you da man

centar · · #36603

my garage hovers around 60 F and the boards stay around 65 C

greenhorn0815 · · #36604

socal?

centar · · #36605

yeah, but up in the mountains

greenhorn0815 · · #36606

nice, i am also foothills ;)

greenhorn0815 · · #36607

weather is perfect now

CritterDog · · #36608

GregoryGHarding wrote:
CritterDog wrote: They should put a signal on the front page on if site is up or down since we never get info when this happens
they do.. "Last share processed: 12:44:14 PM"
Do you mean the little clock inside the coin that your mining?

centar · · #36609

know where frazier park is?

greenhorn0815 · · #36610

i run mine on 425 for a long time, just dont go >70c and u are good

greenhorn0815 · · #36611

yes, i am in sunland

greenhorn0815 · · #36612

la crescenda

greenhorn0815 · · #36613

in that corner

gtorukawa · · #36614

@greenhorn0815 :  ok thanks!

GregoryGHarding · · #36615

@CritterDog : 
CritterDog wrote:
GregoryGHarding wrote:
CritterDog wrote: They should put a signal on the front page on if site is up or down since we never get info when this happens
they do.. "Last share processed: 12:44:14 PM"
Do you mean the little clock inside the coin that your mining?
the top of the main page

CritterDog · · #36616

GregoryGHarding wrote: @CritterDog : 
CritterDog wrote:
GregoryGHarding wrote: they do.. "Last share processed: 12:44:14 PM"
Do you mean the little clock inside the coin that your mining?
the top of the main page
Thats weird I don’t have anything that shows time shares processed on the top of my page. I see it switch from X=11 to Script showing price but no shares processed

CritterDog · · #36617

Oh your talking about under Live workers Ok I see it

lhfx21 · · #36618

centar wrote: if any of you want to try something else, I’m on track to make about $36/day at http://zpool.ca with one L3+ overclocked to 550 mh
How long you been on zpool?

mrsoliman · · #36619

is the pool still down?

lhfx21 · · #36620

mrsoliman wrote: is the pool still down?
I think it is

mck · · #36621

My L3+ (August batch) typically shows the following temperatures: Temp (PCB) I:0 O:57 Temp (Chip) I:0 O:66. I had one board replaced that failed within two weeks. The replacement board was from an earlier batch showing more information: Temp (PCB) I:34 O:53 Temp (Chip) I:81 O:59. Can somebody tell me what means I and O in the temperature indication?

Splinter · · #36622

Pool just restarted

gtorukawa · · #36623

back in biz

Maxiimos · · #36624

mck, the I and O are inlet and outlet

Maxiimos · · #36625

the I temperature should be lower than the O temperature by several degrees

Raietzu · · #36626

@centar can you post some earnings maybe? when i calculated for 500 mhs their 7 day average returned about 11 dollars per day

Morbiduzz · · #36627

I’m feally bored of this pool now, switch at DM for now

mck · · #36628

Which seems the case for PCB, but certainly not for Chip!?

Splinter · · #36629

Pool restarted, its Alive, but problems continues...

platoday · · #36630

yeah I have 0 efficiency(L3+) even though the miner is connected apparently. After 5 days of consistency it was the time to have issues again!

hashingpro · · #36631

@platoday :  After 5 days of consistency???? Where have YOU been mining at?

mck · · #36632

Who can recommend some steady coins for solo mining (via PH) with one L3+, on average finding a few blocks in a few hours or so?

Carson18 · · #36633

is it still down? or just me ?

nolazybits · · #36634

it seems yes

nolazybits · · #36635

think I’m gonna go back to nicehash. came back here as I though being paid in altcoin dirrectly was nie

jmorley · · #36636

Any update from dev’s to say when it will be back up

mck · · #36637

Stratum is alive and accepting shares, but not processing them real time to earnings in the live balance. Current delay is 45 min and before the restart share processing was ~3hrs behind.

jmorley · · #36638

Thanks @mck so we will still get paid just wont be in real time?

AppleMiner · · #36639

did they add the 3 hours behind before the restart or did we lost all that time?

tinnov · · #36640

Every f*ing time this link crashes it moves my SCrypt cards back to 65535 difficulty! Takes hours for the dynamic difficulty to go back down to something reasonable then the stupid server crashes again!

Splinter · · #36641

Lets test zpool

tomos81 · · #36642

wtf all this fucking day only problems! i am renting rigs to fixed time and they are showing me very sad graphs!

mck · · #36643

I think in some cases the share processing will catch up with real time, and if a lot of shares are lost dev’s will do a correction later. Just my experience as a user here.