Chat archive · 2018-03
mycide · Sun Mar 04, 2018 10:30 PM UTC
mke2269 no, its done automatic once per day if u reached threshold.
mke2269 · Sun Mar 04, 2018 11:33 PM UTC
copy that...I reached my threshold but it only cash out half of my balance
mycide · Mon Mar 05, 2018 03:25 AM UTC
@mke3369 that’s because the other half was made after last threshold was reached, so its going to be payed out tomorrow, it will be like this until you stop mining and recieve a final payout perhaps u have to lower ur threshold and even pay fee for getting all out
mycide · Mon Mar 05, 2018 03:27 AM UTC
atm i got 20 odd or so dgb sitting around, most likely will mine more at some point but atm they are stuck if i dont lower threshold to under what i got, next payout it will empty.
Eazy E · Mon Mar 05, 2018 06:07 AM UTC
anyone looking to buy 2 L3+
Forum notification · Mon Mar 05, 2018 09:25 AM UTC
has started a new topic:
Block Found djliss · Mon Mar 05, 2018 11:32 AM UTC
Eazy E wrote: anyone looking to buy 2 L3+ Depends on price and postage to the UK
Forum notification · Mon Mar 05, 2018 12:19 PM UTC
has started a new topic:
Welcome to NewYorkCoin! blakeman12 · Mon Mar 05, 2018 01:19 PM UTC
has anyone noticed that earnings have been a lot lower over the past week or so? Even with LTC being at a higher price
blakeman12 · Mon Mar 05, 2018 01:24 PM UTC
it’s been getting worse also, I don’t understand why?
Steve Sokolowski · Mon Mar 05, 2018 02:03 PM UTC
blakeman12 wrote: it’s been getting worse also, I don’t understand why? that isn’t my experience
Steve Sokolowski · Mon Mar 05, 2018 02:03 PM UTC
the data shows that average earnings are up 14% compared to litecoin over the past 40 days
Steve Sokolowski · Mon Mar 05, 2018 02:03 PM UTC
2% of that comes from just the past four days’ optimizations alone
Steve Sokolowski · Mon Mar 05, 2018 02:03 PM UTC
so I think there may be something that changed with your rigs
Forum notification · Mon Mar 05, 2018 02:09 PM UTC
blakeman12 · Mon Mar 05, 2018 02:19 PM UTC
Hmm I havent changed anything and it’s been saying 100%
CSZiggy · Mon Mar 05, 2018 05:30 PM UTC
Steve Sokolowski wrote: the data shows that average earnings are up 14% compared to litecoin over the past 40 days compared to litecoin, NOT compared to litecoinpool.
CSZiggy · Mon Mar 05, 2018 05:37 PM UTC
average earnings- can you define that please. What all miners go into the average?
CSZiggy · Mon Mar 05, 2018 05:38 PM UTC
if I use c=verge for a password....am I apart of the autopool average? even though I am not switching coins, or am I part of the solo average, even though I am not part of solo?
CSZiggy · Mon Mar 05, 2018 05:39 PM UTC
why isn't there an expected 1/MH chart for those people that use static c= setting? the fact that there isnt seems to indicate those people are apart of 1 of the two chart data you have on your main page.
CSZiggy · Mon Mar 05, 2018 05:40 PM UTC
so are sniping c= miners apart of the autopool average payout chart, or the solo miners payout chart? Until you seperate out your data, your "AVERAGE EARNINGS" statements are all questionable.
Steve Sokolowski · Mon Mar 05, 2018 06:06 PM UTC
CSZiggy wrote: if I use c=verge for a password....am I apart of the autopool average? even though I am not switching coins, or am I part of the solo average, even though I am not part of solo? No. The average only includes customers who do profit-switching mining
Steve Sokolowski · Mon Mar 05, 2018 06:07 PM UTC
and earnings are also up 14% against litecoinpool, as well, because they mine litecoins
ZracheSs · Mon Mar 05, 2018 07:03 PM UTC
Heyy Steve, can you check why I didn’t had my Litecoin payout yet? Only dash portion was made. Thanks and keep up the good job!
Foxx · Mon Mar 05, 2018 07:36 PM UTC
Steve Sokolowski wrote: and earnings are also up 14% against litecoinpool, as well, because they mine litecoins this is kind of vague. is it up 1
Foxx · Mon Mar 05, 2018 07:37 PM UTC
this is kind of vague. is it up 14% against what you were earning or are you saying that you are earning 14% more than Litecoinpool?
Steve Sokolowski · Mon Mar 05, 2018 08:47 PM UTC
to get another equihash bug fixed
djliss · Mon Mar 05, 2018 08:50 PM UTC
am ready to point my GPU rigs at the pool when your ready
crypflash · Mon Mar 05, 2018 09:31 PM UTC
Hi, how to solo mine LTC on this pool? Thanks
shtrudel · Mon Mar 05, 2018 09:43 PM UTC
Why so many reboots today?
Steve Sokolowski · Mon Mar 05, 2018 09:46 PM UTC
there are equihash issues that we’re fixing
Steve Sokolowski · Mon Mar 05, 2018 09:46 PM UTC
most of them are issues in other parts of the system that we just didn’t know about until now
Steve Sokolowski · Mon Mar 05, 2018 09:46 PM UTC
and which have nothing to do with equihash
Forum notification · Mon Mar 05, 2018 10:17 PM UTC
Steve Sokolowski · Mon Mar 05, 2018 10:19 PM UTC
disabled equihash again because now it’s not getting the latest blocks
zafar177 · Mon Mar 05, 2018 10:33 PM UTC
What are the equihash coins that will be available when the algo comes online?
Steve Sokolowski · Mon Mar 05, 2018 10:50 PM UTC
we found that a coin daemons server had crashed
Steve Sokolowski · Mon Mar 05, 2018 10:50 PM UTC
again, another issue that had nothing to do with equihash
Steve Sokolowski · Mon Mar 05, 2018 10:51 PM UTC
our final task is just to verify profitability, which we’ll be able to do once we have some data after an hour
djliss · Mon Mar 05, 2018 11:17 PM UTC
Let me know if and when you would like me to point my GPU rigs here, i am in the UK so getting on for 23:30 now lol but will be up for a while
djliss · Mon Mar 05, 2018 11:19 PM UTC
and the profit chart at the top looks a little off lol $3.5K unless the measurement is G sol/s or T sol/s !!!
d2391 · Mon Mar 05, 2018 11:26 PM UTC
@Steve Sokolowski :
Steve Sokolowski · Mon Mar 05, 2018 11:40 PM UTC
d2391 wrote: @Steve Sokolowski : It won’t return equihash data until there are equihash miners
Steve Sokolowski · Mon Mar 05, 2018 11:41 PM UTC
ok, we’re ready to try with equihash
djliss · Mon Mar 05, 2018 11:42 PM UTC
@Steve Sokolowski :
Forum notification · Mon Mar 05, 2018 11:43 PM UTC
has started a new topic:
Equihash now available djliss · Mon Mar 05, 2018 11:51 PM UTC
both rigs are now moved, on another pool i make 0.05 ish ZEC a day so will see how it compares after a day or 2
djliss · Mon Mar 05, 2018 11:58 PM UTC
@Steve Sokolowski :
djliss · Mon Mar 05, 2018 11:59 PM UTC
have got a few of those, i’m using smos and dstm 5.8 if that helps
JamesBriggs · Mon Mar 05, 2018 11:59 PM UTC
Hey there, is anyone still looking for someone to create REST interfaces for coin daemons?
djliss · Tue Mar 06, 2018 12:00 AM UTC
PH are looking for a developer
JamesBriggs · Tue Mar 06, 2018 12:01 AM UTC
Oh? I don’t know if that’s the same job I saw, or not. This one had to do with creating PHP interfaces, and needed some ripple experience. Right up my alley... I figured I’d ask.
JamesBriggs · Tue Mar 06, 2018 12:01 AM UTC
I don’t have much of a portfolio I’m afraid, but I’m willing to put an interface together to prove my salt as long as I’m paid for my work
JamesBriggs · Tue Mar 06, 2018 12:02 AM UTC
I’m a corporate coder (work for one of the banks
So, I don’t always have the downtime that I do suddenly.
djliss · Tue Mar 06, 2018 12:02 AM UTC
best way to get in contact with steve / the team is send them a support ticket, that way it wil get looked at
djliss · Tue Mar 06, 2018 12:03 AM UTC
i’m not a coder unfortunately, i do infrastructure
Craig · Tue Mar 06, 2018 12:40 AM UTC
what do you guys suggest for a equihash miner
Craig · Tue Mar 06, 2018 12:40 AM UTC
im getting lots of difficulty change errors
djliss · Tue Mar 06, 2018 12:57 AM UTC
i use smos and on another pool i use dstm 0.5.8 which is giving diff errors here, i’m trying ewbf on 1 rig, no errors in miner log but will give it a short while to see what hashrate it picks up
djliss · Tue Mar 06, 2018 12:57 AM UTC
only getting 70% efficiency at the mo
Forum notification · Tue Mar 06, 2018 12:59 AM UTC
has started a new topic:
Can't solo mine Aricoin SteinerMiner · Tue Mar 06, 2018 01:01 AM UTC
c=aricoin m=solo returns a dead status
djliss · Tue Mar 06, 2018 01:02 AM UTC
@SteinerMiner : is the coin in error?
djliss · Tue Mar 06, 2018 01:06 AM UTC
ive just checked, go to the charts page, at the bottom in the live coin status click ALL and NAME then scroll down till you find the coin you want to mine, if you click the coin it will expand it with info in there, also if the coin has a red box around it it means its in error
djliss · Tue Mar 06, 2018 01:06 AM UTC
it is in error by the way
Steve Sokolowski · Tue Mar 06, 2018 01:15 AM UTC
djliss wrote: have got a few of those, i’m using smos and dstm 5.8 if that helps hmmm, maybe we’re not finished with this yet
Steve Sokolowski · Tue Mar 06, 2018 01:15 AM UTC
this is frustrating; it’s so difficult to understand why the people who created equihash made the decisions they did
Steve Sokolowski · Tue Mar 06, 2018 01:16 AM UTC
and there are so many different types of miners
djliss · Tue Mar 06, 2018 01:17 AM UTC
yep, i’m trying ebwf which seems to take the difficulty better
djliss · Tue Mar 06, 2018 01:18 AM UTC
looks like shares are not been credited now, been 30 mins since last credit
djliss · Tue Mar 06, 2018 01:19 AM UTC
only on eqihash though scrypt and x11 fine
djliss · Tue Mar 06, 2018 01:20 AM UTC
scrach that they are being credited now, but been having periods with nothing, last one was half hour
pavvappav · Tue Mar 06, 2018 01:28 AM UTC
Yea, I’m using EWBF’s CUDA Zcash NVIDIA miner and not seeing credited shares even thought he miner is reporting it.
pavvappav · Tue Mar 06, 2018 01:28 AM UTC
More concerning (assuming display problem) is that after 13 minutes I’ve not gotten a "detected new work" message.
djliss · Tue Mar 06, 2018 01:34 AM UTC
ewbf is definitely one of the most popular, but dstm gets more out of your cards, a little more efficient
pavvappav · Tue Mar 06, 2018 01:36 AM UTC
i just setup ewbf for ph, lemme switch to dstm to see if it changes.
djliss · Tue Mar 06, 2018 01:37 AM UTC
are you running it on windows? and have you managed to get more than 1 password argument working?
pavvappav · Tue Mar 06, 2018 01:38 AM UTC
yes on windows, more than 1 password argument too...
pavvappav · Tue Mar 06, 2018 01:39 AM UTC
--pass "n=happy a=equihash" seems to work for the password field.
djliss · Tue Mar 06, 2018 01:40 AM UTC
hmmm, i’m using smos, wondering if that might be an issue, the quotes don’t work for me for some reason
pavvappav · Tue Mar 06, 2018 01:41 AM UTC
just fired up dstm, gonna make dinner and see if it starts to register some shares.
djliss · Tue Mar 06, 2018 01:43 AM UTC
nope quotes on smos make it try and mine scrypt
pavvappav · Tue Mar 06, 2018 01:52 AM UTC
So with dstm it works, but ewbf it does not. No biggie, but may be worth making a note on the help page. :/
So, I don’t always have the downtime that I do suddenly.