Read-only forum archive. PROHASHING has closed. Posting, registration, and account access are unavailable. Preserved from the April 3, 2026 server backup.

Chat archive · 2017-06

FRISKIE · · #4970

Order. On NiceHash you setup orders for hashing power, on that day I had 2 orders running, one on the US and one on Europe servers, had to cancel them to avoid more losses.

tmopar · · #4971

guys bravo bravo... lovin the earnings today... already hit my daily average for the troubled times during the update

tmopar · · #4972

should make double today

tmopar · · #4973

frisk, sorry to hear you are having problems... If it helps you, i am running a diff of between 1024 and 4096 on most of my pieces... no other args

mickeekung · · #4974

730 GH/s

mjgraham · · #4975

I hope it will be in the future possible to get the data delay down during the good times, I don’t like knowing that if has started mining 2 min in the past I would have been doing good

n00bminer · · #4976

tmopar, I think Chris threw in some extra as a nice gesture for the downtime

fattygrub · · #4977

where’s today’s payout?

tmopar · · #4978

LTC network capacity is down 20%... are they...... hitting prohashing?

FRISKIE · · #4979

Anyone mining X11 with NiceHash?

fattygrub · · #4980

why aren’t prohashing reps online here telling us what’s goin on?

ap1318 · · #4981

@ fattygrub they are. Check out viewtopic.php?f=7&p=6316#p6316

tmopar · · #4982

@stevesokolowski ITs doing the thing again where when you try to mine solo, it attempts to connect you instead to the litecoin network

tmopar · · #4983

@stevesokolowski sorry, I had made a small typo, false alarm

n00bminer · · #4984

rut roh, over 603GH

n00bminer · · #4985

I have more trouble with the ETH wallet than any other wallet ever since 2013

n00bminer · · #4986

tmopar, I think you are right, that is a huge drop of LTC network capacity

n00bminer · · #4987

ETH surging in the market

tmopar · · #4988

@stevesokolowski , @chrissokolowski Ok, unfortunately this is not a typo... I tried to mine some argus coin solo... I did so for about an hour or two. Then I set that same worker to mine just normal pps..... It was remembering the solo mining and every time the unit connected it would say in the earnings page it was solo mining still, the worker was stalled precisely in the way it was before ( about a minute before shares flow) and it is on the LTC network (can tell by the difficulty).... It has started to produce shares now after about 90 seconds... I will keep you posted as to performance

FRISKIE · · #4989

@ Chris & Steve - my report is a positive one - Nicehash mining for a few hours now over Scrypt with great performance!

Sunegg · · #4990

What parameters are you using @ FRISKIE ?

mickeekung · · #4991

Sunegg wrote: What parameters are you using @ FRISKIE ?
https://forums.prohashing.com/viewtopic.php?f=5&t=1539 this may help you. Try this ^^

Sunegg · · #4992

Thanks mickeekung

denise0848 · · #4993

What is the best "d=xxx" setting for Gridseed Blades mining on Prohashing?

gekkeleo · · #4994

more people having connection problems

tmopar · · #4995

ok update.... so after that initial period the worker has continued with a hash rate reported at the miner at ~70mh it should do about 75, but it was looking like 50 something when i had originally typed earlier. I think its had enough time to where the time dialiation has overcame that dead period

tmopar · · #4996

denise, the gridseed blades are around 2~5 mh... you would need to set the minimum difficulty. Otherwise you may go several coin changes without a share. I suggest d=768 or d=1024 but its still high for that low a rate

n00bminer · · #4997

for gridseeds at the present time : d=1024 is your only option

tmopar · · #4998

is 1024 the new minimum?

n00bminer · · #4999

512 is best, 768 is a close 2nd, but those are unavailable right now

n00bminer · · #5000

yes sir

tmopar · · #5001

i know steve said he raised it, i figured it was 768

n00bminer · · #5002

2^10 is minimum

denise0848 · · #5003

Thanks for the information

tmopar · · #5004

no problem, this forum is actually really helpful most times

n00bminer · · #5005

profit wise, it has not been bad at 1024, just not as good as 512/768 for the gridseeds, I have 4 working (1 dead ) lol

tmopar · · #5006

you talkin the little orbs or the blades

tmopar · · #5007

shes got the blades that only do LTC etc

n00bminer · · #5008

blades, been running since 2014 when it was a big deal =) came here after clever died

GregoryGHarding · · #5009

hows everyones profitibility looking today

n00bminer · · #5010

https://prnt.sc/fhx9f8

tmopar · · #5011

im up quite a bit but i think they dumped some money in the accounts this morning... im on pace to make about double the usual

GregoryGHarding · · #5012

n00b those 5 blades?

denise0848 · · #5013

I came to Prohashing when Clevermining shut down. Always suspected their new owner was skimming off of the top.

n00bminer · · #5014

yes sir

n00bminer · · #5015

in a milk crate, in the computer room at work lol

GregoryGHarding · · #5016

interesting in parting ways with one. its difficult to find a working one for a decent price

tmopar · · #5017

i came to the game late... was clevermining a precursor to prohashing

GregoryGHarding · · #5018

interested*

n00bminer · · #5019

yea they are sooo over priced every where. in august when my L3+’s come in, I will sell these off

n00bminer · · #5020

of course when I bought these they were 1.5K a piece

GregoryGHarding · · #5021

is 90USD without psu lowballing?

n00bminer · · #5022

10 Months ROI

n00bminer · · #5023

@90

tmopar · · #5024

ebay right now goin for 75 plus shipping, i recently bought about 150 orbs myself i got a fairly good deal on them but had to travel... gonna put some up ebay

GregoryGHarding · · #5025

would you sell it for that

n00bminer · · #5026

I hope in August I can dump them for that, heck yea

GregoryGHarding · · #5027

i wanna look at getting the best i can for no more than 100USD because canadian currency conversion is a bitch

n00bminer · · #5028

I have 5 of the small seeds idle, they are just too much trouble, eat too much power

GregoryGHarding · · #5029

if you plan on selling them for less, im there. just keep me in mind or shoot me a pm

tmopar · · #5030

I bought them for the resale really... i got a lot of raspis from the same person

n00bminer · · #5031

you run 10 per raspi?

tmopar · · #5032

nice stuff, i think someone died or something

tmopar · · #5033

I got a laptop actually running 10 right now

tmopar · · #5034

I would do say 4 or so

tmopar · · #5035

per

tmopar · · #5036

or get a laptop

n00bminer · · #5037

100 of them, thats 36mh/s?

tmopar · · #5038

raspis have problems with hubs that even bullshit 50 dollar laptops dont have

tmopar · · #5039

yeah, clock 860 ~ 360

GregoryGHarding · · #5040

i heard anker hubs work well with rpi

n00bminer · · #5041

Yea I have mine running 5 blades (10 USB) on a single raspi, the orbs using the same type of usb hub only could do 5 per

tmopar · · #5042

quality hub will change everything... a word to the wise, dont bother getting USB3 hubs... the raspi just dont like them.. even the new raspi 3

GregoryGHarding · · #5043

anyway i got to take off now. n00b keep me in mind for when you sell em

n00bminer · · #5044

I bought an A2 110 terminator off ebay not long ago for 650, that’s a better deal than buying blades

n00bminer · · #5045

ok sir

tmopar · · #5046

i did the same... you cannot find a deal like that anymore

n00bminer · · #5047

829GH/s dooooom!

tmopar · · #5048

even the bullshit miners are 400 dollars.. i seen a warmachine go for that

tmopar · · #5049

plus shipping

n00bminer · · #5050

lol thats funny. I need it to stay up like this until 2018

tmopar · · #5051

ya know

tmopar · · #5052

its funny ou say that, i thought i would be out by now too

tmopar · · #5053

i bought early april... but now hell i might stay in through winter, get that free heat

n00bminer · · #5054

the heat is pretty good in the winter lol

tmopar · · #5055

oh yeah, right now i got windows open in two rooms of the house and sealed off as best i can, fans blowing out shirts under the doors

tmopar · · #5056

i can keep it 75 in here and 95 in the miner rooms

tmopar · · #5057

btw, there are some killer remote temperature monitors on ebay that were designed for pools and stuff but work in open air, like 16 dollars i highly recommend it, got 3 channels

n00bminer · · #5058

That’s why I brought mine in to work, placed in the computer room.

n00bminer · · #5059

I had my gpu miners in there for a while in my old cube lol.

tmopar · · #5060

the noise tho... how’d you mask that in a cubical?

n00bminer · · #5061

I like the A2, I tried to modify the cfminer launching to run screen, so I could actually watch the miner, but it does’t like to launch with screen....Most likely an issue with my syntax

tmopar · · #5062

its the pipe

tmopar · · #5063

its redirecting the pipe to get all those stats

n00bminer · · #5064

ahh it is a un occupied computer room. The new sysadmin sits up remotely now

tmopar · · #5065

if the web works the console wont and vice versa i think

n00bminer · · #5066

Thanks! I didn’t want the non-mining time to figure it out lol

n00bminer · · #5067

I had to modify the page for authentication though lol it’s on my network, didn’t want the prying nerds to wonder whats this IP

tmopar · · #5068

if you are worried about wayward connections, just rename the script to some very long string... its low tech, quick and will provide some protection

tmopar · · #5069

they would then have to analyize the packets and be able to get in the middle