Page 15 of 15

Re: Owners of A4 General Discussion and Help

Posted: Fri Dec 30, 2016 12:02 pm
by CritterDog
Steve Sokolowski wrote:
CritterDog wrote:
Longsnowsm wrote:Inno is having a hardware jig to flash the B1 and B2 miners to the current firmware for the STM on the hashing boards sent around to customers to update the miners. Once you flash the boards and upgrade to v2.0.2 the miners seem to run stable. I have mine flashed and running here and so far they are stable. Not hashing at the advertised rated, but they are at least stable now.
I would like to thank Longsnowsm for flashing my cards for me.. I had to be without them for a week but fed ex was slow because of holidays.. I am now finally back up tonight with the new upgrade thanks to Longsnowsm.. THANKS A MILLION!!
I'm glad to see that you finally got everything working.

Does that mean that the broken router was just a theory and didn't actually cause the issue?
Hi Steve
Yes it looks like it was the A4s all along.. I am going on 12 hours now with not one drop out..I am not using any special settings either :)

Re: Owners of A4 General Discussion and Help

Posted: Wed Feb 15, 2017 9:08 am
by Hkct1
citronick wrote:Steve/Chris... seems my b3 v2.02 latest firmware fixed the issues -- do we still need the g=off and h=50 settings? I omitted them and seems working OK all the way to maximum MHs.

Tests results after Batch 3 v2.02 firmware https://bitcointalk.org/index.php?topic ... sg17116548

For Batch 1 and 2 owners -- please see note from Innosilicon in Bitcointalk:
https://bitcointalk.org/index.php?topic ... sg17109937
Hi are you still experiencing the same results?