L3 Miner Very Inefficient

Encounter a problem related to the pool or have a request for a feature? Post your issue here and we will help you out.
Kfedorek
Posts: 29
Joined: Sun Sep 10, 2017 6:33 pm

Re: L3 Miner Very Inefficient

Post by Kfedorek » Fri Sep 29, 2017 2:48 pm

Ya same here...missing like 1.5-2 LTC at current daily averages and the time of the day.
zikkah
Posts: 4
Joined: Fri Sep 29, 2017 2:56 pm

Re: L3 Miner Very Inefficient

Post by zikkah » Fri Sep 29, 2017 3:00 pm

Jalapan wrote:
dog1965 wrote:huh what do you mean ?
he means stale shares/shares not counting properly or something similar.. and the brothers that run this pool always take care of 99% of the errors.
most likely we will be refunded etc
Thanks for that reply. Just got started today and was a bit surprised about the earnings too, to say the least ;)
dog1965
Posts: 113
Joined: Sun Sep 03, 2017 8:27 am

Re: L3 Miner Very Inefficient

Post by dog1965 » Fri Sep 29, 2017 3:30 pm

I dont know why but it works for me try to stay low on the diff seems to work much better dont go lower than 2048 though.
zikkah
Posts: 4
Joined: Fri Sep 29, 2017 2:56 pm

Re: L3 Miner Very Inefficient

Post by zikkah » Fri Sep 29, 2017 4:05 pm

Do you look up the different numbers of diffs somewhere, or is it pure trial and error?
dog1965
Posts: 113
Joined: Sun Sep 03, 2017 8:27 am

Re: L3 Miner Very Inefficient

Post by dog1965 » Fri Sep 29, 2017 5:40 pm

pure trial and error.
perandre
Posts: 2
Joined: Fri Sep 29, 2017 12:56 pm

Re: L3 Miner Very Inefficient

Post by perandre » Sat Sep 30, 2017 4:15 am

Support got back to me:

Hi,

I apologize for the issue. From September 28 at 7PM (ET) to September 29 at 5PM (ET), the mining server experienced a bug and was crediting people less than they deserved for high difficulty shares. We have fixed the bug, and I just increased user balances for those two days proportionately to how they were affected. As always, please feel free to contact us if you have any other problems.

Sincerely,

-Chris Sokolowski
Manager, Prohashing.com
dog1965
Posts: 113
Joined: Sun Sep 03, 2017 8:27 am

Re: L3 Miner Very Inefficient

Post by dog1965 » Sat Sep 30, 2017 5:28 am

thanks chris. keep up the good work.
molitar
Posts: 2
Joined: Tue Oct 03, 2017 1:45 am

Re: L3 Miner Very Inefficient

Post by molitar » Tue Oct 03, 2017 3:07 am

Ok I have a question. Current miners are running at d=131072

Miners

molitar.1 ~463.52 MH/s
molitar.2 ~480.78 MH/s
molitar.3 ~581.33 MH/s
molitar.4 ~508.40 MH/s

3 and 4 are consistantly higher than either 1 and 2. Does this mean my d value would be incorrect for 1 and 2 and if so any suggestions which direction?

Efficiency 93.33% but only running about an hour so far so waiting to see if that goes up anymore.
dog1965
Posts: 113
Joined: Sun Sep 03, 2017 8:27 am

Re: L3 Miner Very Inefficient

Post by dog1965 » Tue Oct 03, 2017 7:07 am

TRY bringing 1 and 2 lower see what that does what type of miners are they l3+'s if so not all units run at the same speed no matter which pool you on but like I said bring down d= on 1 and 2 see what that does.
molitar
Posts: 2
Joined: Tue Oct 03, 2017 1:45 am

Re: L3 Miner Very Inefficient

Post by molitar » Tue Oct 03, 2017 9:54 am

dog1965 wrote:TRY bringing 1 and 2 lower see what that does what type of miners are they l3+'s if so not all units run at the same speed no matter which pool you on but like I said bring down d= on 1 and 2 see what that does.
Ok is there best practice for how much to bring it down? like 1/8th, 1/4th, etcetera?

Second approximately how much should I make with 4 of these miners daily currently?
Post Reply