has started a new topic: Bad applications are killing the cryptocurrency industry

As we slowly get into Summer here in TX and Eth keeps dropping. I think I’m going to have to shut down my miners.

it’s a simple as that, and these other coins on Tron like USDD are going to suffer the same problem because they haven’t discovered whatever that new technology is

that’s right - there is not yet an algorithm known that can keep a coin stable

Sarah Manter wrote:

Banished_Privateer wrote: "some people working against UST"

Right now, it’s UST, but that doesn’t mean all stable coins. They’ve been working specifically against Luna..

Honestly it’s terrible LUNA TERRA devs, their algorithm for stable coin and collateral was really bad. You don’t need bad actor in UST to make it fail.

has started a new topic: Welcome to our new Front End Software Engineer!

has started a new topic: Welcome to our new Front End Software Engineer!

B1ackMi16 wrote: Something off with the Chia pooling now? Usually accepted shares are around 98.5-99.5%, now it is 85%.

Chia was down for about 30 minutes last night while Chris moved the coin daemon over to a new server.

Something off with the Chia pooling now? Usually accepted shares are around 98.5-99.5%, now it is 85%.

Thanks Steve

has started a new topic: Upcoming downtime to reduce power consumption

we have no idea why

the issue was resolved; it looks like a restart of the daemon was needed

this looks like a complex issue that is going to require significant investigation, because it’s not in our code

Yes - there is the following error in the logs: CreateNewBlock: TestBlockValidity failed: bad-txns-inputs-missingorspent, CheckTxInputs: inputs missing/spent (code 16)

is Kapow down again?

has started a new topic: Chris to release bugfixes for mining servers

has started a new topic: Considering removal of "a=" password argument

Kaffiend wrote: gminer now has 100% unlock as well

<3

gminer now has 100% unlock as well

Some of our coins are temporarily offline due to some server maintenance we’re performing and will likely be back online later in the day: Blastcoin, Cheesecoin, Dinero, NewYorkCoin, Shieldcoin, StrongHands, Terracoin, Viacoin, AdvancedInternetBlock, Emerald, KREDS, Manna, Mooncoin

has started a new topic: New HiveOS Startup Guide

Tether also lost its peg this morning; Prohashing keeps its reserves in USDC for this reason, because USDC is the only coin other than GUSD that is subject to US laws

Who knows how I can set the mining difficulty in hiveos?

Banished_Privateer wrote: "some people working against UST"

Right now, it’s UST, but that doesn’t mean all stable coins. They’ve been working specifically against Luna..

"some people working against UST"

Sarah said that

so yea, I would be careful about stablecoins now.

ETH gas prices are up to 1000! Great time for mining

rodzm14 wrote: What happened to Luna status. Unable to cash out

There are some people actively working against Luna to lower UST’s value with the goal of pushing it down to 0. Looks like the project is in the process of going under.

What happened to Luna status. Unable to cash out

has started a new topic: ethash difficulty stuck at 1.07

just 1.238,58 €

AMD released the 6*50s - AMD Radeon™ RX 6950 XT is still avaiable in store

if it stays that way over nigh the 3060v2 will join the unlock party

nah I’m ok with scratching the 60 mark with my 3060ti and no funky stuff so far. still not a big fan of the missing auto fan, but NBminer is doing its work

I have EVGA cards so no issue, but I understand that for the lhr cards you need the evga bios flash, which you can do with X1 easily.

-MaVerick- wrote: I have no luck with those 100% LHR unlockers so far >.> NH is a NoGo, T-Rex is crashing my GPU every 20min, NBminer 41.0 brings my PC into sleep mode and 41.3 cannot lock the core clock for some reason

Have you flashed using the EVGA recent bio release?

jesus the new GUI design is fugly and horrible. Fucking undo it please

thanks :)

-MaVerick- wrote: was that eth mining server restart expected or unexpected?

It was expected. This was part of the changes that we were working on yesterday that had to be pushed back a bit to make sure they were working properly first.

Macky82 wrote: trex 0.26.1 test is released

Macky82 wrote: https://trex-miner.com/download/test/t- ... .1-win.zip

Macky82 wrote: use nvidia driver 512.15

If you’re willing, that would be a great thing to post in the GPU mining forum so that it doesn’t disappear as the chat box fills eventually.

use nvidia driver 512.15

https://trex-miner.com/download/test/t- ... .1-win.zip

trex 0.26.1 test is released

was that eth mining server restart expected or unexpected?

-MaVerick- wrote: development is so fast right now, those bugs will me smashed in no time. Its looking quite promising right now though with NBminer doing what its supposed to do and nothing more. yet

Agreed.

*be

development is so fast right now, those bugs will me smashed in no time. Its looking quite promising right now though with NBminer doing what its supposed to do and nothing more. yet

-MaVerick- wrote: they do, until something crashes looks like NBminer does not reset OC settings when getting closed, so that was screwing with my tests.

Found it. They switched from MSI AB to OCtune. But I think this was the Nicehash version , not the NBminer.

Sarah Manter wrote:

-MaVerick- wrote: they do, until something crashes looks like NBminer does not reset OC settings when getting closed, so that was screwing with my tests.

I feel like I read something about that, and the person had to switch apps for the overclocking...I wish I remember where I saw that!

I can’t find it. If I come back across it I’ll let you know.

-MaVerick- wrote: they do, until something crashes looks like NBminer does not reset OC settings when getting closed, so that was screwing with my tests.

I feel like I read something about that, and the person had to switch apps for the overclocking...I wish I remember where I saw that!

they do, until something crashes looks like NBminer does not reset OC settings when getting closed, so that was screwing with my tests.

-MaVerick- wrote: I have no luck with those 100% LHR unlockers so far >.> NH is a NoGo, T-Rex is crashing my GPU every 20min, NBminer 41.0 brings my PC into sleep mode and 41.3 cannot lock the core clock for some reason

That’s a bummer. It sounded like they were working so well.

I have no luck with those 100% LHR unlockers so far >.> NH is a NoGo, T-Rex is crashing my GPU every 20min, NBminer 41.0 brings my PC into sleep mode and 41.3 cannot lock the core clock for some reason

thx

ok, i will reset my router.

rmpx wrote: Anyone else having connection issues mining XMR and ETH?

What are you seeing when you have trouble connecting? There don’t appear to be widespread issues with those coins currently.

Anyone else having connection issues mining XMR and ETH?

https://archive.prohashing.com/

Any way to get the old color scheme back? Not a fan of the new colors

BCH and LTC have been updated

We are releasing mining server bug fixes soon, so there’s going to be a very short disconnect.

has started a new topic: Coinbase holds resolved?

halleluja! NBminer has no fan control except for the % and it made my PC go into sleep mode

has started a new topic: PROHASHING announces the release of its newly rebranded and redesigned website

Macky82 wrote: trex released full unlock lhr

Exciting!

trex released full unlock lhr

has started a new topic: RandomX crazy high Hashrates

alrighty, back to that 100% unlock

Thank you, it’s working again. Have a nice evening!

thanks for your patience, and see you tomorrow!

Chris reverted to the previous version - this will probably take some time

we’ll have to try again tomorrow

I don’t see my workers receiving any jobs, but all of them are making bad shares now after the most recent restart 1-2min ago

mav3001

what is your username?

both primary and merged mined shares are stale

what rejection messages are you receiving?

they can connect and after that, nada

switching mining software also does not help, I don’t think thats an issue on my end

same after a disconnect just now

there was a disconnect of all workers about 10-15min ago, since then no worker is getting any jobs, one of them is making bad shares

-MaVerick- wrote: Somethings wrong with Ethash. I think it’s dead, Jim.

We’re not aware of any issues; we released a new version of one of the mining servers, and found that a lot of customers were submitting old jobs, but things returned to normal

Somethings wrong with Ethash. I think it’s dead, Jim.

next 100% unlock has been released with NBminer

has started a new topic: Major releases over the next two days

has started a new topic: Help needed: Cannot connect - malformed server message

at ethash mining at dag #491 diff is set at 2.147G, since yesterday my gminer is mining at that diff, not change at all, i didnt set specific diff at my gminer

unlock have been around awhile now. But they are claiming 100% unlock now

that’s nothing new - it’s been around since November

Looks like NH has unlocked LHR...

has started a new topic: MWEB

Ravencoin was in error due to exchange maintenance, but Vance worked around it, and it’s now back up.

The Litecoin daemon crashed last night, but Chris restarted it and things have returned to normal. Kawpow/Ravencoin is currently down because the coin is in error at the exchange. We’re looking into if there’s a way to work around it, but if not, we’ll have to wait until the exchange completes its maintenance.

Has it resolved for anyone. Mine are still connecting and disconnecting

i would like to get stratum servers in australia or asia or even closer 248ms for ping is bad

the problem is that there US based they need to hire people for diff time zones

Good point.. maybe issues with the US stratum servers.. Still frustrating.. Some updates would be nice.

Refinerysg wrote: and where the heck is the 3.6TH/s coming from for scrypt FPPS?????

maybe EU still up

Mine are scrypt miners as well

and where the heck is the 3.6TH/s coming from for scrypt FPPS?????

Funny that all my S17’s are still chugging away, but all my Scrypt is stuck. all my stuff was directed to PPLNS, so little concerning that it shut that down and gave the error that a failsafe was triggered..

Id be earning and then it would stop for a while then resume

Something is going on. Looks like no mining until this bs gets sortedd out.

It’s knocked about 150 of my machines down.

My authorization fails number is screaming on the mining page.. Something is sus for sure..

I keep thinking its my miners but they are working fine. They seem to connect and disconnect from the pool

yep.. Making it difficult to remote change pools..

@refinerysg still having the same problem? Mine keep going in and out.

Seems like its a problem thats widespread. Anybody from support?

Also getting AUTHORIZATION (1,604) 3 seconds ago Authorization failed because the static coin/algorithm combination is in error.

An emergency failsafe was triggered to prevent Prohashing from excessive losses. WTF!!

The anchor coin is not able to be mined and there are no other suitable coins available for this worker.

Getting this error

I have two miners but showing others with zero hash. Keeps doing that. Anybody know whats wrong.

Pretty soon, around 2 or 3 PM ET, Vance will be making some necessary updates to the mining server, so LTC will be down briefly.

has started a new topic: No coinbase payout since April 11

has started a new topic: Password argument error

has started a new topic: How to make PH absolutely Sexy!

has started a new topic: Check out the new website!

Website will be down for a few minutes this afternoon as we prepare for the new website

Sarah Manter wrote: Ravencoin is back online

Ravencoin is back online

We are aware that Kawpow is in error, and we’re looking into it.

has started a new topic: Possible uses for older GPUs

i was just getting off and tried starting my miner and i thought it was my terrible install of ubuntu i did, lol.

ohh i guess eth dead for everyone....

has started a new topic: ETHash connections?

Looks like Eth died

has started a new topic: Merge Mined Coins in PPLNS/Solo

B1ackMi16 wrote: No plans of adding autolycos / Ergo support?

Not right now; our goal is to get even better with our existing algorithms, and to add Ghostrider support first

No plans of adding autolycos / Ergo support?

but unfortunately, for most people, it’s Gemini or nothing

thundergun wrote: Now that Celsius is limited for usa peoples, What other places do earn with BTC in the USA? Gemini? Any others that are legit? I read the guide, but it needs to be updated, since the recent changes.

Gemini is the best choice for people with less than $10m - when you have more than that, you can go directly to Genesis

Now that Celsius is limited for usa peoples, What other places do earn with BTC in the USA? Gemini? Any others that are legit? I read the guide, but it needs to be updated, since the recent changes.

has started a new topic: Adventures in frame making

has started a new topic: Newbie PC Building 101 - Sarah Style

-MaVerick- wrote: Yeah sort of. We are the only customers though It’s a house with us living upstairs. Depending on how good the solar system is working we could also use it to heat later this year, making us a little less dependant from gas

Also awesome!

Yeah sort of. We are the only customers though It’s a house with us living upstairs. Depending on how good the solar system is working we could also use it to heat later this year, making us a little less dependant from gas

-MaVerick- wrote: Absolutely. We got no contract with a power company ourselfes anymore, instead we pay a fixed amount to her. In a few years when the investment is paying of itself we can also see about that.

Interesting. So she’s like her own power company now.

Absolutely. We got no contract with a power company ourselfes anymore, instead we pay a fixed amount to her. In a few years when the investment is paying of itself we can also see about that.

-MaVerick- wrote:

Sarah Manter wrote: Happy Earth Day! If you mine with renewable energy, what type? What’s your setup?

Solar powered for about 20 days now Our landlord is taking care of that though, so I don’t know all details. Battery is looking good, I guess we got 60-70% of our usage covered atm

That’s pretty awesome that your landlord is taking care of it!

Sarah Manter wrote: Happy Earth Day! If you mine with renewable energy, what type? What’s your setup?

Solar powered for about 20 days now Our landlord is taking care of that though, so I don’t know all details. Battery is looking good, I guess we got 60-70% of our usage covered atm

has started a new topic: Coming soon to the crypto mining pool you trust!

Happy Earth Day! If you mine with renewable energy, what type? What’s your setup?

Nvm, looks like it’s back

Ethash down for anyone else?

Those Kyber Network coins I’ve had sat there forever cos they can’t be transferred to Coinbase are slowly creeping up

has started a new topic: T-Rex 0.25.12 for LHR Cards (Win10)