How to deal with Antminer red light flashing?
Posted: Fri Aug 05, 2022 4:28 am
When your Antminer's fault light is flashing red, you can restore it by restarting.
There are two ways to restart the miner. The first is to turn off the miner, then turn it on again. The second is to click "Reboot" on the miner interface, as shown below:
Miner Backstage> System> Reboot
![Image]()
Of course, there are many possibilities to cause the red light to flash. If it cannot be solved by restarting, you need to repair it according to the inspection results.
There are two ways to restart the miner. The first is to turn off the miner, then turn it on again. The second is to click "Reboot" on the miner interface, as shown below:
Miner Backstage> System> Reboot
Of course, there are many possibilities to cause the red light to flash. If it cannot be solved by restarting, you need to repair it according to the inspection results.