To be clear, you're talking about something more automated than the worker configurator?TechElucidation wrote: ↑Mon Apr 04, 2022 3:03 pm Hello,
Something I would really like to see is the ability to track profitability more efficiently to decide if there is something else we should be mining. Right now for smaller cards, things have gone back and forth between Kawpow or Etchash. To be honest it wasn't till the outage a few days ago that I realized that Etchash had come up, and have actually switched over. As you know, it is not as easy as saying today Kawpow is 5.11c and 3.16c - and know which to mine until you know how well your system does each one.
What would be really nice is to be able to create a list of 'devices' or 'rigs' and list what capabilities each has (algos supported, and at what rate), then have that tie into the profitability data to say what it would do under each algo. I can create a spreadsheet right now, then go to the status page, and plug the numbers in, but that can become cumbersome to do. I get excited about the idea, but then lazy about execution.
So for example I could add my '3060Rig' as a device (it has five 3060 Ti's, a 2060, and an AMD 5600xt - so pretty unique to me alone), and right now it is doing about ~294Mh/s on Ether. But I would like to also record that it can do x Mh/s if I used Kawpow, and y Mh/s if I was doing Etchash. Then be able to easily use the daily profitability data to see (roughly) earnings per day based on that, so I can confirm which is the best in my particular circumstance.
To put the icing on the cake, it would be able to set alerts if the 'best performer' were to change significantly. This would probably go crazy on things that were neck and neck and we can't change every 5 minutes, so perhaps if you could say 'tell me if the best one changes by 5% or more', or just a once a day confirmation when you update the profitability pages.
Anyways, just my idea.
Website Wishlist
Forum rules
The Development forum is for discussion of development releases of Prohashing and for feedback on the site, requests for features, etc.
While we can't promise we will be able to implement every feature request, we will give them each due consideration and do our best with the resources and staffing we have available.
For the full list of PROHASHING forums rules, please visit https://prohashing.com/help/prohashing- ... rms-forums.
The Development forum is for discussion of development releases of Prohashing and for feedback on the site, requests for features, etc.
While we can't promise we will be able to implement every feature request, we will give them each due consideration and do our best with the resources and staffing we have available.
For the full list of PROHASHING forums rules, please visit https://prohashing.com/help/prohashing- ... rms-forums.
- Sarah Manter
- Posts: 639
- Joined: Fri Aug 13, 2021 11:15 am
- Contact:
Re: Website Wishlist
- Sarah Manter
- Posts: 639
- Joined: Fri Aug 13, 2021 11:15 am
- Contact:
Re: Website Wishlist
No promises, but I created a ticket for Michael to look into this. It'll be a bit probably before he has the chance because his top priority right now is getting the new website released by the end of the month.
- TechElucidation
- Posts: 44
- Joined: Fri Mar 18, 2022 2:01 pm
Re: Website Wishlist
Correct. Even with the Worker Configurator I would have to go in each day and put each device in, and select each algorithm, and track the estimated profits.Sarah Manter wrote: ↑Mon Apr 04, 2022 7:14 pmTo be clear, you're talking about something more automated than the worker configurator?TechElucidation wrote: ↑Mon Apr 04, 2022 3:03 pm Hello,
Something I would really like to see is the ability to track profitability more efficiently to decide if there is something else we should be mining. Right now for smaller cards, things have gone back and forth between Kawpow or Etchash. To be honest it wasn't till the outage a few days ago that I realized that Etchash had come up, and have actually switched over. As you know, it is not as easy as saying today Kawpow is 5.11c and 3.16c - and know which to mine until you know how well your system does each one.
What would be really nice is to be able to create a list of 'devices' or 'rigs' and list what capabilities each has (algos supported, and at what rate), then have that tie into the profitability data to say what it would do under each algo. I can create a spreadsheet right now, then go to the status page, and plug the numbers in, but that can become cumbersome to do. I get excited about the idea, but then lazy about execution.
So for example I could add my '3060Rig' as a device (it has five 3060 Ti's, a 2060, and an AMD 5600xt - so pretty unique to me alone), and right now it is doing about ~294Mh/s on Ether. But I would like to also record that it can do x Mh/s if I used Kawpow, and y Mh/s if I was doing Etchash. Then be able to easily use the daily profitability data to see (roughly) earnings per day based on that, so I can confirm which is the best in my particular circumstance.
To put the icing on the cake, it would be able to set alerts if the 'best performer' were to change significantly. This would probably go crazy on things that were neck and neck and we can't change every 5 minutes, so perhaps if you could say 'tell me if the best one changes by 5% or more', or just a once a day confirmation when you update the profitability pages.
Anyways, just my idea.
What I would like to see is a page where I could save eacg if my devices in ProHashing, with hashrates for each algorithm, and then be able to see a table of results instantly (and hopefully get alerts).
So for example, I might save these three devices to my profile:
Code: Select all
Name: NAS
ETHash: 0
ETCHash: 31
Kawpow: 7.9
Name: NAS2060
ETHash: 31
ETCHash: 31
Kawpow: 12
Name: 3060Rig
ETHash: 294
ETCHash: 274
Kawpow: 144
Code: Select all
Device ETHash ETCHash Kawpow
NAS - $0.4549 $0.3861
NAS2060 $1.0365 $0.9402 $0.5865
3060Rig $9.8296 $8.3102 $7.0378
- Sarah Manter
- Posts: 639
- Joined: Fri Aug 13, 2021 11:15 am
- Contact:
Re: Website Wishlist
OK. Thank you for the details. No promises, but I’m putting in a ticket to look into this. It would definitely be a bit before we can look into it because the top priority right now is getting the rebranded website out first.TechElucidation wrote: ↑Tue Apr 05, 2022 5:50 amCorrect. Even with the Worker Configurator I would have to go in each day and put each device in, and select each algorithm, and track the estimated profits.Sarah Manter wrote: ↑Mon Apr 04, 2022 7:14 pmTo be clear, you're talking about something more automated than the worker configurator?TechElucidation wrote: ↑Mon Apr 04, 2022 3:03 pm Hello,
Something I would really like to see is the ability to track profitability more efficiently to decide if there is something else we should be mining. Right now for smaller cards, things have gone back and forth between Kawpow or Etchash. To be honest it wasn't till the outage a few days ago that I realized that Etchash had come up, and have actually switched over. As you know, it is not as easy as saying today Kawpow is 5.11c and 3.16c - and know which to mine until you know how well your system does each one.
What would be really nice is to be able to create a list of 'devices' or 'rigs' and list what capabilities each has (algos supported, and at what rate), then have that tie into the profitability data to say what it would do under each algo. I can create a spreadsheet right now, then go to the status page, and plug the numbers in, but that can become cumbersome to do. I get excited about the idea, but then lazy about execution.
So for example I could add my '3060Rig' as a device (it has five 3060 Ti's, a 2060, and an AMD 5600xt - so pretty unique to me alone), and right now it is doing about ~294Mh/s on Ether. But I would like to also record that it can do x Mh/s if I used Kawpow, and y Mh/s if I was doing Etchash. Then be able to easily use the daily profitability data to see (roughly) earnings per day based on that, so I can confirm which is the best in my particular circumstance.
To put the icing on the cake, it would be able to set alerts if the 'best performer' were to change significantly. This would probably go crazy on things that were neck and neck and we can't change every 5 minutes, so perhaps if you could say 'tell me if the best one changes by 5% or more', or just a once a day confirmation when you update the profitability pages.
Anyways, just my idea.
What I would like to see is a page where I could save eacg if my devices in ProHashing, with hashrates for each algorithm, and then be able to see a table of results instantly (and hopefully get alerts).
So for example, I might save these three devices to my profile:
Then I could simply go the 'device profitability' page, and get a table like this without having to enter the information every time.Code: Select all
Name: NAS ETHash: 0 ETCHash: 31 Kawpow: 7.9 Name: NAS2060 ETHash: 31 ETCHash: 31 Kawpow: 12 Name: 3060Rig ETHash: 294 ETCHash: 274 Kawpow: 144
Obviously it should support all the algorithms that can be switched between and supported on ProHashing, I am just being lazy targeting these three. You could then highlight the highest one for each device, and as I mentioned, if it changes significantly or once a day, send an email to the user so we would know ETCHash was now earning more than Kawpow.Code: Select all
Device ETHash ETCHash Kawpow NAS - $0.4549 $0.3861 NAS2060 $1.0365 $0.9402 $0.5865 3060Rig $9.8296 $8.3102 $7.0378
Re: Website Wishlist
Either way... THANK YOU !Sarah Manter wrote: ↑Mon Apr 04, 2022 7:15 pmNo promises, but I created a ticket for Michael to look into this. It'll be a bit probably before he has the chance because his top priority right now is getting the new website released by the end of the month.
- OneOfThePetes
- Posts: 57
- Joined: Tue Oct 26, 2021 4:40 pm
Re: Website Wishlist
Revert the colour scheme to the previous one so I can bear actually using prohashing again.
By far the worst looking site I've seen in a long time.
By far the worst looking site I've seen in a long time.
I left because I hate the colour scheme.
Plenty of other mining pools out there that don't look as terrible.
Plenty of other mining pools out there that don't look as terrible.
-
- Posts: 7
- Joined: Fri Apr 19, 2024 4:07 am
Re: Website Wishlist
That sounds like a fantastic idea! A fullscreen option for widgets on the earnings page would definitely enhance user experience, allowing for better visibility and analysis of hash rate and earnings graphs. This could significantly improve usability and make the data more accessible at a glance. Additionally, integrating such a feature could add a touch of sophistication to the platform, aligning with the concept of "[/uhttps://snazzystep.com/wp-admin/rl]" by enhancing its visual appeal and functionality.