Difficulty settings suggestions? not sure what to set it at

Encounter a problem related to the pool or have a request for a feature? Post your issue here and we will help you out.
Forum rules
Welcome to the System Support forum! Encounter a problem related to the pool? Post your issue here and we will help you out.

Keep in mind that the forums are monitored by PROHASHING less closely than the official support channels, so if you have a pressing issue, please submit an official support ticket so that our Support Analyst can look into your issue in a timely manner.

We cannot answer financial questions related to your account on a public forum, so those questions should always be submitted through the orange Support button on prohashing.com/about.

For the full list of PROHASHING forums rules, please visit https://prohashing.com/help/prohashing- ... rms-forums.
Post Reply
jake217
Posts: 4
Joined: Thu Apr 20, 2017 1:52 pm

Difficulty settings suggestions? not sure what to set it at

Post by jake217 » Thu Apr 20, 2017 1:56 pm

Preordered a Antminer L3+ its rated at 504mhs I cant find any difficulty settings anywhere for it. Is there a calculator or rule of thumb when choosing? Ive been using Slushpool for BTC for awhile but lost on Scrypt need a benchmark please.
User avatar
Chris Sokolowski
Site Admin
Posts: 945
Joined: Wed Aug 27, 2014 12:47 pm
Location: State College, PA

Re: Difficulty settings suggestions? not sure what to set it at

Post by Chris Sokolowski » Sat Apr 22, 2017 6:30 pm

The difficulty is set on the pool side. At Prohashing, difficulty will automatically be set so that your miner submits a share about every 5-10 seconds. You can also set our difficulty manually with the "d=#" password argument. More details on that are in the help section. If you do set difficulty manually, then you should experiment until you get the optimal earnings, not necessarily the optimal hashrate, because there is a tradeoff between profitability (which decreases with increasing difficulty) and hashrate (which increases with increasing difficulty).
excelerator
Posts: 140
Joined: Mon Dec 28, 2015 1:58 pm

Re: Difficulty settings suggestions? not sure what to set it at

Post by excelerator » Sat Apr 22, 2017 11:21 pm

jake217 wrote:Preordered a Antminer L3+ its rated at 504mhs I cant find any difficulty settings anywhere for it. Is there a calculator or rule of thumb when choosing? Ive been using Slushpool for BTC for awhile but lost on Scrypt need a benchmark please.
s

You may want to set the password switch "h=5" which I use on my Titans and older L3s to prevent excessive switching between easy low value coins. You will want to experiment with the "h=" switch over a few days and see if it helps.
jake217
Posts: 4
Joined: Thu Apr 20, 2017 1:52 pm

Re: Difficulty settings suggestions? not sure what to set it at

Post by jake217 » Tue Apr 25, 2017 5:07 pm

excelerator wrote:
jake217 wrote:Preordered a Antminer L3+ its rated at 504mhs I cant find any difficulty settings anywhere for it. Is there a calculator or rule of thumb when choosing? Ive been using Slushpool for BTC for awhile but lost on Scrypt need a benchmark please.
s

You may want to set the password switch "h=5" which I use on my Titans and older L3s to prevent excessive switching between easy low value coins. You will want to experiment with the "h=" switch over a few days and see if it helps.



5? only 5?
excelerator
Posts: 140
Joined: Mon Dec 28, 2015 1:58 pm

Re: Difficulty settings suggestions? not sure what to set it at

Post by excelerator » Tue Apr 25, 2017 5:10 pm

Yes - that optimizes restarts for me. You may find lower is better
jake217
Posts: 4
Joined: Thu Apr 20, 2017 1:52 pm

Re: Difficulty settings suggestions? not sure what to set it at

Post by jake217 » Tue Apr 25, 2017 5:12 pm

excelerator wrote:Yes - that optimizes restarts for me. You may find lower is better
ok thanks ill try it!
Post Reply