Live Mining Status shows 0.000 H/s?

Discuss issues with mining rigs and connectivity issues with experienced Prohashing miners.
Forum rules
Welcome to the mining rig and connectivity support forum!

This forum is for discussing issues with mining rigs and connectivity issues with experienced PROHASHING miners. This is a great place to ask questions about connecting specific hardware to PROHASHING.

Remember, PROHASHING employees do not closely monitor the forums like we do the official support channels, so this forum's purpose is to connect you with other PROHASHING miners who have experience with similar hardware/issues. If you have connectivity issues you are unable to resolve here on the forum, please submit a ticket through the official support channels.

For the full list of PROHASHING forums rules, please visit https://prohashing.com/help/prohashing- ... rms-forums.
Post Reply
fonestar
Posts: 4
Joined: Thu Aug 15, 2019 1:14 pm

Live Mining Status shows 0.000 H/s?

Post by fonestar » Thu Aug 15, 2019 1:20 pm

So I finally got my cgminer setup and working with my Nvidia 1070 and 1080 cards.

cgminer shows a combined hash rate mining script of around 250kH/s (which seems really low, but that's a separate issue).

But "Live Mining Status" on Prohashing.com shows that I am generating no hash at all. What gives? I am connected. Where is all my hash power going?
ridersnexus
Posts: 2
Joined: Thu Aug 15, 2019 8:50 pm

Re: Live Mining Status shows 0.000 H/s?

Post by ridersnexus » Thu Aug 15, 2019 8:52 pm

The issue is your trying to mine script with gpu's Try Equihash-144_5
fonestar
Posts: 4
Joined: Thu Aug 15, 2019 1:14 pm

Re: Live Mining Status shows 0.000 H/s?

Post by fonestar » Fri Aug 16, 2019 8:52 pm

Hmm... tried Equihash too on TCP port 3336 and I get a "no pool to connect" error.
fonestar
Posts: 4
Joined: Thu Aug 15, 2019 1:14 pm

Re: Live Mining Status shows 0.000 H/s?

Post by fonestar » Fri Aug 16, 2019 8:57 pm

TCP port 3345 says:

"pool 0 JSON stratum auth failed: (unknown reason)

Mining shows up under "live" for about a minute and then disappears.
fonestar
Posts: 4
Joined: Thu Aug 15, 2019 1:14 pm

Re: Live Mining Status shows 0.000 H/s?

Post by fonestar » Sat Aug 17, 2019 2:31 am

Nevermind... I just downloaded gminer instead and it works way better/easier "out of the box".
Post Reply