Page 1 of 1
M.A.T. / Alcheminer disconnect
Posted: Mon Aug 21, 2017 3:20 pm
by micca410evo
Hey Fellas,
Could one of you see why my worker "mat30" is kicking out after connecting?
I can't monitor on this side, but it seems to connect to any pool (litecoinpool/PH) but disconnects after a couple of secs. I tried vardiff, static, doesn't care, it connects shows up and disconnects after 10/30 secs. (Can you guys see the reason why on your side?) Thanks in advance.
Re: M.A.T. / Alcheminer disconnect
Posted: Mon Aug 21, 2017 4:21 pm
by whitenoise
micca410evo wrote:Hey Fellas,
Could one of you see why my worker "mat30" is kicking out after connecting?
I can't monitor on this side, but it seems to connect to any pool (litecoinpool/PH) but disconnects after a couple of secs. I tried vardiff, static, doesn't care, it connects shows up and disconnects after 10/30 secs. (Can you guys see the reason why on your side?) Thanks in advance.
i have the same problem(
Re: M.A.T. / Alcheminer disconnect
Posted: Mon Aug 21, 2017 6:40 pm
by n00bminer
have you tried just a single coin? like c=Bitconnectcoin
Re: M.A.T. / Alcheminer disconnect
Posted: Mon Aug 21, 2017 7:58 pm
by micca410evo
solved.. have added 4 more ttyUSB commands and that solved the problem.. (thanks for the 3 day headache M.A.T.
)
Re: M.A.T. / Alcheminer disconnect
Posted: Tue Aug 22, 2017 2:32 am
by whitenoise
micca410evo wrote:solved.. have added 4 more ttyUSB commands and that solved the problem.. (thanks for the 3 day headache M.A.T.
)
What command? Write here please, because my problem does't fix
Re: M.A.T. / Alcheminer disconnect
Posted: Tue Aug 22, 2017 1:52 pm
by micca410evo
whitenoise wrote:micca410evo wrote:solved.. have added 4 more ttyUSB commands and that solved the problem.. (thanks for the 3 day headache M.A.T.
)
What command? Write here please, because my problem does't fix
Do you have Alcheminers / M.A.T. 's also?
I'll post the lines i added tonight. Also set static at 32768..
Re: M.A.T. / Alcheminer disconnect
Posted: Tue Aug 22, 2017 7:39 pm
by fugju
whitenoise wrote:
What command? Write here please, because my problem does't fix
Have you flashed your boards? Use you bfgminer or the crap stock python miner-software?
If you looking so ->
, than please take an moment and looking in my thread
M.A.T / Alchemist Firmware issue solution (c)jstefanop
But since any months the support for ubuntu 12.04 (this OS is on the controller of MAT/Alche) ends ... so you need to search for alternative mirrors for pakets or downloading and installing manualy.