L3+ dead after restart

Discuss issues with mining rigs and connectivity issues with experienced Prohashing miners.
Post Reply
josedecuba
Posts: 4
Joined: Sat Apr 17, 2021 6:57 pm

L3+ dead after restart

Post by josedecuba » Sat Apr 17, 2021 7:02 pm

my l3+ was working fine and now after a restart refuse to connect back again. no change was made on the config . just showing dead but the machine connect to my second pool whitout any problem. the second pool is another pool
chrisroman1
Posts: 4
Joined: Mon Jun 03, 2019 10:00 am

Re: L3+ dead after restart

Post by chrisroman1 » Sat Apr 17, 2021 10:19 pm

Ummmm just press the reset button on the device. It happens to me all the time.
josedecuba
Posts: 4
Joined: Sat Apr 17, 2021 6:57 pm

Re: L3+ dead after restart

Post by josedecuba » Sun Apr 18, 2021 10:22 am

chrisroman1 wrote:
Sat Apr 17, 2021 10:19 pm
Ummmm just press the reset button on the device. It happens to me all the time.
thanks for the suggestion but it dindt
not for me, i did a reboot, load again the firmware, and a lot of reboot, and nothing resolve my problem, iam just mining to another pool, i dind try anymore today. maybe later i'll try again. i no it does not have any sense.
User avatar
ToeKnee
Posts: 10
Joined: Fri Apr 16, 2021 10:07 am

Re: L3+ dead after restart

Post by ToeKnee » Tue Apr 20, 2021 7:50 pm

I have an L3+ and this is what I use through HiveOS Asic for L3+. I know that HiveOS's firmware for the L3+ runs a little different than other brands of firmware, e.g., look at the variable inside the password ... it reflects the worker's name.

Pool: stratum+tcp://prohashing.com:3333
Wallet: [YOUR PROHASHING USER NAME]
Pw: n=%WORKER_NAME%,o=L3
Post Reply