Page 1 of 1

antminer E3 not connecting

Posted: Mon Sep 03, 2018 9:27 pm
by hobospices
I cannot get my antminer e3 to connect. did anyone have any luck?

Re: antminer E3 not connecting

Posted: Mon Sep 03, 2018 9:43 pm
by hobospices
i notice that the e3 adds stuff to the user name
Image

unlike other antminer which just show the user name
Image

Re: antminer E3 not connecting

Posted: Tue Oct 02, 2018 10:53 am
by davidc14
I have tried several ways, using proxy, using a=ethash on 3333 or proxy, also tried direct port 3339 and all report pool dead on e3 interface? I've tried going through MRR and then to prohash and still cannot connect? Any update on this?

Re: antminer E3 not connecting

Posted: Tue Oct 02, 2018 12:35 pm
by Steve Sokolowski
davidc14 wrote:I have tried several ways, using proxy, using a=ethash on 3333 or proxy, also tried direct port 3339 and all report pool dead on e3 interface? I've tried going through MRR and then to prohash and still cannot connect? Any update on this?
We released a fix earlier this morning for this problem. Try again now, and see if you have any success.

If not, could you attach the images? Above, the post just states "image."

Re: antminer E3 not connecting

Posted: Tue Oct 02, 2018 1:13 pm
by davidc14
Ok will try when I get back to datacenter, can you tell me if I need to do anything special in username or password fields?

Re: antminer E3 not connecting

Posted: Tue Oct 02, 2018 1:34 pm
by davidc14
Not connecting either way have tried the following
stratum+tcp://prohashing:3333
[username].worker
a=ethash

stratum+tcp://prohashing:3339
[username].worker
{no password}

stratum+tcp://prohashing:3339
[username]
worker

and proxy:443 with same settings, for all still shows dead in miner?

Re: antminer E3 not connecting

Posted: Wed Oct 03, 2018 12:51 pm
by Steve Sokolowski
More information about this issue is now available at E3 miners update.

Re: antminer E3 not connecting

Posted: Mon Dec 17, 2018 12:52 am
by citronick
any new developments on E3 support?

after using the usual parameters, E3 is shown alive at poolside but no hash accepted and the E3 is not hashing as well.

Re: antminer E3 not connecting

Posted: Mon Dec 17, 2018 6:56 am
by Steve Sokolowski
citronick wrote:any new developments on E3 support?

after using the usual parameters, E3 is shown alive at poolside but no hash accepted and the E3 is not hashing as well.
Could you submit a support tickets with screenshots of the E3 dashboard? Vance is not able to reproduce this issue. He used an E3 for testing.

I think that the difference might be the password arguments or port you're using. The fields we need are requested in the ticket system, so once we get those, we'll see if we forgot to test a configuration you're using.